
Kjellberg · Carbon steels
GARANT BR — E 7016
covered electrode · stick electrodebasic coating
Choose the size
- Ø 2.5 × 350 mm · 4.3 kg≈ 4.3 kg
- Ø 3.25 × 350 mm · 4.3 kg≈ 4.3 kg
- Ø 4 × 450 mm · 5.6 kg≈ 5.6 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
6.97–11.14 kg
of GARANT BR for 10 m of weld
3 packs of 4.3 kg
Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Do I need to preheat?With this product's data: H10
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm
130 °C
Minimum preheat and minimum interpass temperature
EN 1011-2, annex C, method B · rounded up to 5 °C
✓ Within the range of method B.
Calculated with: HD 10 ml/100 g from this product's class H10 · 111 — basic electrode: 24 V, 160 A, 15 cm/min
See the full calculation →Field of application
General-purpose electrode for use in industry and workshops for site and repair welding of non-alloy and low-alloy steels. Particularly noteworthy are its good welding characteristics in positional welding and on AC.
Base metals
Non-alloy structural steels: S235 to S355Fine-grain structural steels: S275 to S420Shipbuilding steels: A32/36, D32/36, E32/36, A50, D40Pressure vessel steels: P195 to P355Pipeline steels: L210 to L360Cast steels: GE200, GE240, GP 240, G20Mo5, G21Mn5Reinforcing steels: BSt 420, BSt 500
| Positions | PA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up |
|---|---|
| Polarity | DC+/AC |
Classification and approvals
Classification
| AWS class | E 7016 |
|---|---|
| EN ISO class | E 42 2 B 12 H10 |
Approvals
- DB, TÜV, CE
According to the Kjellberg 2019 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the weld metal
| C | 0.07 |
|---|---|
| Mn | 0.60 |
| Si | 0.30 |
Values in mass %.
Mechanical properties
| Yield strength (Rp0.2) | > 420 MPa |
|---|---|
| Tensile strength (Rm) | 510–610 MPa |
| Elongation (A5) | > 22 % |
| Impact energy (KV) | > 47 J (−20 °C) |
How to weld
Treatment and preparation
| Re-drying | 300–350 °C / 2 h |
|---|
Storage
In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.
| Moisture in the covering | More spatter and porosity: redry, above all when low hydrogen content is required. |
|---|
According to the Kjellberg 2019 catalogue
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 2.5 mm | 350 mm | 80–100 A |
| 3.25 mm | 350 mm | 100–130 A |
| 4 mm | 450 mm | 120–160 A |
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same AWS designation
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| GARANT AC/DCKjellberg | E7016 | 510–610 MPa | > 100 J (−30 °C) | To order · price and lead time in the quote |
Similar
ISO 2560-A: same strength (42), equal or better toughness (47 J at −20 °C), same covering (B), no alloy symbol
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| LASER B 50Gedik | E 42 5 B 42 H5 | 510–630 MPa | min. 47 J (−50 °C) | To order · price and lead time in the quote |
| LASER B 47Gedik | E 42 4 B 42 H5 | 510–600 MPa | min. 47 J (−40 °C) | To order · price and lead time in the quote |
| LASER B 47-AGedik | E 42 4 B 32 H5 | 500–610 MPa | min. 47 J (−46 °C) | To order · price and lead time in the quote |
| LASER B 60Gedik | E 42 4 B 42 H5 | 520–630 MPa | min. 47 J (−40 °C) | To order · price and lead time in the quote |
Show all (6)
Similar
ISO 2560-A: same strength (42), equal or better toughness (47 J at −20 °C), same covering (B), no alloy symbol
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| GARANTKjellberg | E 42 2 B 42 H10 | 540–590 MPa | > 90 J (−20 °C) | To order · price and lead time in the quote |