We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Carbon steels

GARANT AC/DC — E 7016

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 350 mm · 4.3 kg
    ≈ 4.3 kg
  • Ø 3.25 × 350 mm · 4.3 kg
    ≈ 4.3 kg
  • Ø 4 × 450 mm · 5.3 kg
    ≈ 5.3 kg
  • Ø 5 × 450 mm · 5.3 kg
    ≈ 5.3 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

6.97–11.14 kg

of GARANT AC/DC for 10 m of weld

3 packs of 4.3 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Do I need to preheat?With this product's data: H10
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm

130 °C

Minimum preheat and minimum interpass temperature

EN 1011-2, annex C, method B · rounded up to 5 °C

✓ Within the range of method B.

Calculated with: HD 10 ml/100 g from this product's class H10 · 111 — basic electrode: 24 V, 160 A, 15 cm/min

See the full calculation →

Field of application

General-purpose electrode with high mechanical properties for industry and workshops, for welding non-alloy and low-alloy steels. Of particular note are its good welding characteristics in positional welding and on AC.

Base metals

Non-alloy structural steels: S235 to S355Fine-grain structural steels: S275 to S420Shipbuilding steels: A32/36, D32/36, E32/36, A40, D40Pressure vessel steels: P195 to P355Pipeline steels: L210 to L360Cast steels: GE200, GE240, GP240, G20Mo5, G21Mn5Reinforcing steels: BSt 420, BSt 500
PositionsPA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS classE 7016
EN ISO classE 42 3 B 12 H10

Approvals

  • DB, TÜV, CE
According to the Kjellberg 2019 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.08
Mn1.00
Si0.40
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)> 450 MPa
Tensile strength (Rm)510–610 MPa
Elongation (A5)> 24 %
Impact energy (KV)> 100 J (−30 °C)

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
2.5 mm350 mm80–100 A
3.25 mm350 mm100–130 A
4 mm450 mm120–160 A
5 mm450 mm160–200 A
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same AWS designation
ProductClassRmKVAvailability
GARANT BRKjellbergE7016510–610 MPa> 47 J (−20 °C)To order · price and lead time in the quote
Similar
ISO 2560-A: same strength (42), equal or better toughness (47 J at −30 °C), same covering (B), no alloy symbol
ProductClassRmKVAvailability
LASER B 50GedikE 42 5 B 42 H5510–630 MPamin. 47 J (−50 °C)To order · price and lead time in the quote
LASER B 47GedikE 42 4 B 42 H5510–600 MPamin. 47 J (−40 °C)To order · price and lead time in the quote
LASER B 47-AGedikE 42 4 B 32 H5500–610 MPamin. 47 J (−46 °C)To order · price and lead time in the quote
LASER B 60GedikE 42 4 B 42 H5520–630 MPamin. 47 J (−40 °C)To order · price and lead time in the quote