We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket

Calculators

Preheat temperature — EN 1011-2, method B

For non-alloy and low-alloy steels. The minimum preheat and interpass temperature comes from the composition (CET), the thickness, the consumable's diffusible hydrogen and the heat input. With the composition from your 3.1 certificate the result is your steel's.

Steel
Composition, % by mass
The steel standard's values: the middle of the range where the standard gives a minimum and a maximum; the maximum of C, Si and Mn where it gives only a maximum; the other elements at 0. Replace them with your certificate's.
Part
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm
Welding
Sets k, the typical hydrogen and starting parameters; replace them with yoursk = 0.8 · EN 1011-1
H class in the consumable's designation (H5, H10…); with none, keep the process defaultmethod B: HD from 1 to 20 ml/100 g
= 2.50 mm/s
Heat input Q
1.23 kJ/mm
method B: Q from 0.5 to 4.0 kJ/mm
How we calculate it
  1. Carbon equivalent — EN 1011-2, C.3
    CET = C + (Mn + Mo)/10 + (Cr + Cu)/20 + Ni/40 = 0.20 + (1.60 + 0.00)/10 + (0.00 + 0.00)/20 + 0.00/40 = 0.360 % CE (IIW) = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15 = 0.467 %
  2. Heat input, EN 1011-1
    Q = k·U·I / (v·1000) = 0.8·24·160 / (2.50 mm/s·1000) = 1.23 kJ/mm
  3. The four terms of EN 1011-2, C.3
    T_CET = 750·CET − 150 = 120.0 °C T_d = 160·tanh(d/35) − 110 = 160·tanh(20.0/35) − 110 = −27.4 °C T_HD = 62·HD^0.35 − 100 = 62·10^0.35 − 100 = 38.8 °C T_Q = (53·CET − 32)·Q − 53·CET + 32 = −3.0 °C
  4. Sum and rounding
    Tp = T_CET + T_d + T_HD + T_Q = 128.5 °C → 130 °C

Preheat by thicknessCET 0.360 · HD 10 · Q 1.23

050100150200250102030405060708090thickness, mm°CNo preheat needed130 °C · d 20

ResultEN 1011-2 · B

130 °C

Minimum preheat and minimum interpass temperature

EN 1011-2, annex C, method B · rounded up to 5 °C

Carbon equivalent CET
0.360 %
CE (IIW), for information
0.467 %
Heat input Q
1.23 kJ/mm
Design thickness d
20.0 mm
HD
10 ml/100 g

✓ Within the range of method B.

From the catalogue, for this result

Preheat with each consumable's H class and the rest of your data

  • LASER B 43
    AWS E7016-1 H4 · EN ISO E 38 4 B 42 H5
    See product →
    With H5: 100 °C
  • LASER B 47
    AWS E7018 H4 · EN ISO E 42 4 B 42 H5
    See product →
    With H5: 100 °C
  • LASER B 47-A
    AWS E7016-1 H4 · EN ISO E 42 4 B 32 H5
    See product →
    With H5: 100 °C

Standards and sources

  1. EN 1011-2:2001 + A1:2003 — annex C, method B (CET): formula and range
  2. EN 1011-1:2009 — heat input Q and thermal efficiency k
  3. ISO 3690:2018 — diffusible hydrogen in weld metal
  4. EN 10025-2:2019 — composition of S235JR and S355J2
  5. EN ISO 683-2:2018 — composition of 42CrMo4
  6. EN 10204:2004 — 3.1 certificate with your steel's actual composition

Indicative results: good for planning and ordering material; they do not replace the WPS.

← All calculators