We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Carbon steels

LASER B 43 — E 7016-1 H4

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 350 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 450 mm
    ≈ 5 kg
  • Ø 5 × 450 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.56
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

8.09–10.94 kg

of LASER B 43 for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.56 — from the datasheet (recovery 110 %, Ø 2.5 × 350 mm) · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm

100 °C

Minimum preheat and minimum interpass temperature

EN 1011-2, annex C, method B · rounded up to 5 °C

✓ Within the range of method B.

Calculated with: HD 5 ml/100 g from this product's class H5 · 111 — basic electrode: 24 V, 160 A, 15 cm/min

See the full calculation →

Field of application

  • Low-hydrogen basic electrode with a weld metal recovery of about 110 %
  • Used especially for structures at risk of cracking, thick sections, repair welding of steels of unknown grade and welding of high-carbon steels
  • Before use, redry the electrodes at 300 °C to 350 °C for 2 h

Base metals

S235JR-E295S235J2G3-S355J2G3C22C35P235T1-P355T1P235T2P355T2L210-L320L290MB-L320MBP235G1THP255G1THP235GHP265GHP295GHS235JRS1-S235J4SS315G1S-S355G3SS255N-S355NP255NH-P355NHS255NL-S355NLGE200-GE240
API 5L:
ABX42X46X52X56
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS classE 7016-1 H4
EN ISO classE 38 4 B 42 H5

Approvals

  • TSE, CE, ABS, SEPRO, DNV-GL
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.06
Mn0.70
Si0.50
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 400 MPa
Tensile strength (Rm)490–600 MPa
Elongation (A5)min. 24 %
Impact energy (KV)min. 47 J (−50 °C)

How to weld

Process

Recoveryapprox. 110 %

Treatment and preparation

Re-drying300–350 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2.5 mm350 mm80–110 A
3.2 mm350 mm100–140 A
4 mm450 mm130–190 A
5 mm450 mm190–240 A
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same AWS designation
ProductClassRmKVAvailability
LASER B 47-AGedikE7016-1 H4500–610 MPamin. 47 J (−46 °C)To order · price and lead time in the quote