
GARANT — E 7018
Choose the size
- Ø 2 × 250 mm · 1.6 kg≈ 1.6 kg
- Ø 2.5 × 350 mm · 4.6 kg≈ 4.6 kg
- Ø 3.25 × 350 mm · 4.5 kg≈ 4.5 kg
- Ø 3.25 × 450 mm · 6 kg≈ 6 kg
- Ø 4 × 350 mm · 5 kg≈ 5 kg
- Ø 4 × 450 mm · 6 kg≈ 6 kg
- Ø 5 × 450 mm · 6 kg≈ 6 kg
- Ø 6 × 450 mm · 6 kg≈ 6 kg
We reply within 1 working day.
How much filler metal do I need?With this product's data: 111 · η 0.52
8.77–11.86 kg
of GARANT for 10 m of weld
Calculated with: η 0.52 — from the datasheet (recovery 110 %, Ø 2 × 250 mm) · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Do I need to preheat?With this product's data: H10
130 °C
Minimum preheat and minimum interpass temperature
EN 1011-2, annex C, method B · rounded up to 5 °C
✓ Within the range of method B.
Calculated with: HD 10 ml/100 g from this product's class H10 · 111 — basic electrode: 24 V, 160 A, 15 cm/min
See the full calculation →Field of application
Basic general-purpose electrode with medium-droplet transfer for joining non-alloy and low-alloy steels in mechanical engineering, steel construction and shipbuilding, with excellent welding characteristics. Particularly well suited to positional welding. The weld metal with very low gas content and the high deoxidising capacity give reliable welds even on steels with higher P, S and C content. Special low-moisture-absorption covering (LMA type).
Base metals
| Positions | PA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up |
|---|---|
| Polarity | DC+ |
Classification and approvals
Classification
| AWS class | E 7018 |
|---|---|
| EN ISO class | E 42 2 B 42 H10 |
Approvals
- BV, DNV-GL, LR, DB, TÜV, CE, ABS, PRS
Composition and properties
Chemical composition of the weld metal
| C | 0.08 |
|---|---|
| Mn | 1.00 |
| Si | 0.50 |
Mechanical properties
| Yield strength (Rp0.2) | > 450 MPa |
|---|---|
| Tensile strength (Rm) | 540–590 MPa |
| Elongation (A5) | > 27 % |
| Impact energy (KV) | > 90 J (−20 °C) |
How to weld
Process
| Recovery | 110 % |
|---|
Treatment and preparation
| Re-drying | 300–350 °C / 2 h |
|---|
Storage
In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.
| Moisture in the covering | More spatter and porosity: redry, above all when low hydrogen content is required. |
|---|---|
| LMA covering | Redrying only every 8 h. |
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 2 mm | 250 mm | 70–90 A |
| 2.5 mm | 350 mm | 80–110 A |
| 3.25 mm | 350 mm | 110–140 A |
| 3.25 mm | 450 mm | 110–140 A |
| 4 mm | 350 mm | 140–180 A |
| 4 mm | 450 mm | 140–180 A |
| 5 mm | 450 mm | 170–220 A |
| 6 mm | 450 mm | 210–260 A |
General-purpose basic electrode for joining non-alloy and low-alloy steels — S235 to S355, fine-grain up to S420 — in machinery, steel construction and shipbuilding.
- LMA covering: picks up moisture more slowly[datasheet · catalogue]
- Approved by BV, DNV-GL, LR, ABS and PRS[datasheet]
- Reliable joints even on steels with higher P, S and C content[datasheet]
- Over 90 J at −20 °C in the weld metal[datasheet]
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| LASER B 47Gedik | E7018 H4 | 510–600 MPa | min. 47 J (−40 °C) | To order · price and lead time in the quote |
| LASER B 60Gedik | E7018 H4 | 520–630 MPa | min. 47 J (−40 °C) | To order · price and lead time in the quote |
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| LASER B 50Gedik | E 42 5 B 42 H5 | 510–630 MPa | min. 47 J (−50 °C) | To order · price and lead time in the quote |
| LASER B 47-AGedik | E 42 4 B 32 H5 | 500–610 MPa | min. 47 J (−46 °C) | To order · price and lead time in the quote |
| GARANT AC/DCKjellberg | E 42 3 B 12 H10 | 510–610 MPa | > 100 J (−30 °C) | To order · price and lead time in the quote |
Show all (6)
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| GARANT BRKjellberg | E 42 2 B 12 H10 | 510–610 MPa | > 47 J (−20 °C) | To order · price and lead time in the quote |