We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Creep-resisting Cr-Mo steels

ELCOR M Mo FCW — E80T1 – A1 M

flux-cored wire (FCW)

Choose the size

  • Ø 1.2 mm · D 320
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 138 · η 0.90–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

4.62–6.81 kg

of ELCOR M Mo FCW for 10 m of weld

1 pack of 15 kg

Calculated with: η 0.90–0.98: typical value for process 138 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →

Field of application

  • Metal type flux-cored wire which provides a smooth arc, low spatter and good weldability.
  • This type of electrode is commonly used in the fabrication and erection of boilers and pressure vessels.
  • Typical applications include the welding of C-Mo steel base metals such as ASTM.
  • High efficiency type for economic production environments and Mo-steels up to 500 °C.
  • Metal cored wire without slag primarily used with Argon/Carbon Dioxide shielding gas mixtures in the flat and horizontal-vertical positions, however, welds in other positions are also possible using the short-circuiting or pulsed arc modes of transfer.
  • Fast freezing characteristics facilitate butt and fillet welding.
  • Shielding gas: M21

Base metals

DIN:
HlHII17Mn419Mn515Mo316Mo3
EN:
P 235 GHP 265 GHP 295 GHP 235 T1/T2-P355 NL210-L485S255-L460
ASTM:
A 161A 204A 302
Gr A plateA335-P1 pipe
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC+
Shielding gasAr + CO2, M21

Classification and approvals

Classification

AWS classE80T1 – A1 M
EN ISO classT 46 2 Mo M M 3
EN ISO 17634-AT MoL M M 3

Approvals

  • SEPRO, CE
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.03
Mn1.20
Mo0.50
Si0.06
Values in mass %.

Mechanical properties

typical values
after stress relieving: 620 °C / 1 h, furnace cooled to 300 °C, then air
Yield strength (Rp0.2)min. 470 MPa
Tensile strength (Rm)550–680 MPa
Elongation (A5)min. 20 %
Impact energy (KV)min. 47 J (−20 °C) · 147 J (0 °C) · 162 J (20 °C)
as welded
Yield strength (Rp0.2)min. 470 MPa
Tensile strength (Rm)550–680 MPa
Elongation (A5)min. 20 %
Impact energy (KV)min. 47 J (−20 °C) · 102 J (0 °C) · 158 J (20 °C)

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Similar
ISO 17632-A: same strength (46), equal or better toughness (47 J at −20 °C), same cored-wire type (M)
ProductClassRmAvailability
DT-MF 10 FCWDratecT 46 6 M M 1 H5530–680 MPaTo order · price and lead time in the quote
ELCOR M 70 FCWGedikT 46 4 M M 3To order · price and lead time in the quote
DT-MF 35 FCWDratecT 46 2 Mo MM 1 H5650 MPaTo order · price and lead time in the quote