Download PDF
← Technical datasheet
Gedik · Creep-resisting Cr-Mo steels
FERVEO

ELCOR M Mo FCW — E80T1 – A1 M

Technical datasheet · flux-cored wire (FCW) · Ø 1.2 mm
FT-ELCOR-M-MO-FCW-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
flux-cored wire (FCW)
Standard
E80T1 – A1 M
Diameters
Ø 1.2 mm
Application
  • Metal type flux-cored wire which provides a smooth arc, low spatter and good weldability.
  • This type of electrode is commonly used in the fabrication and erection of boilers and pressure vessels.
  • Typical applications include the welding of C-Mo steel base metals such as ASTM.
  • High efficiency type for economic production environments and Mo-steels up to 500 °C.
  • Metal cored wire without slag primarily used with Argon/Carbon Dioxide shielding gas mixtures in the flat and horizontal-vertical positions, however, welds in other positions are also possible using the short-circuiting or pulsed arc modes of transfer.
  • Fast freezing characteristics facilitate butt and fillet welding.
  • Shielding gas: M21
Classification
AWS class
E80T1 – A1 M
EN ISO class
T 46 2 Mo M M 3
EN ISO 17634-A
T MoL M M 3
Approvals

SEPRO, CE

Validity is confirmed with the order

Chemical composition of the weld metal
C
Mn
Mo
Si
0.03
1.20
0.50
0.06
Values in mass %.
Base metals

DIN: Hl · HII · 17Mn4 · 19Mn5 · 15Mo3 · 16Mo3

EN: P 235 GH · P 265 GH · P 295 GH · P 235 T1/T2-P355 N · L210-L485 · S255-L460

ASTM: A 161 · A 204 · A 302

Gr A plate · A335-P1 pipe

Sizes and packaging
Ø
Packaging
Code
1.2 mm
D 320
GDK-3010500386
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELCOR-M-MO-FCW-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Creep-resisting Cr-Mo steels
FERVEO

ELCOR M Mo FCW — E80T1 – A1 M

Technical datasheet · flux-cored wire (FCW) · Ø 1.2 mm
FT-ELCOR-M-MO-FCW-EN
rev. 2 · 2026-11-21
page 2 / 2
Mechanical properties
typical values
after stress relieving: 620 °C / 1 h, furnace cooled to 300 °C, then air
Yield strength (Rp0.2)
min. 470 MPa
Tensile strength (Rm)
550–680 MPa
Elongation (A5)
min. 20 %
Impact energy (KV)
min. 47 J (−20 °C) · 147 J (0 °C) · 162 J (20 °C)
as welded
Yield strength (Rp0.2)
min. 470 MPa
Tensile strength (Rm)
550–680 MPa
Elongation (A5)
min. 20 %
Impact energy (KV)
min. 47 J (−20 °C) · 102 J (0 °C) · 158 J (20 °C)
Process
Polarity
DC+
Shielding gas
Ar + CO2, M21
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up · PG vertical-down
Shielding
Requires shielding gas
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELCOR-M-MO-FCW-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue