Calculators
Filler metal consumption per weld
Bevelled butt and fillet welds. The preparation is filled in to EN ISO 9692-1 and any dimension can be replaced by your drawing's. The result is in kilos, as a range: from a flush weld to the maximum excess weld metal of EN ISO 5817.
Reference, covered electrode, level C: 1 m of single-V in 10 mm plate — 0.69–1.12 kg; 1 m of fillet with throat a 5 — 0.30–0.60 kg.
How we calculate it
- Preparation cross-section, without excess weld metal — EN ISO 2553A₀ = a² = 5² = 25 mm² (z = a·√2 = 7.07; A₀ = z²/2)
- Maximum excess weld metal of level C, EN ISO 5817 (imperfection 503)h ≤ 1 + 0.15·w, ≤ 4 mm; w = 10 mm → h = 2.5 mm A = A₀ + ⅔·w·h = 41.67 mm²
- Weld metalM = A·L·ρ = (25–41.7 mm²)·20 m·7.85 g/cm³ = 3.93–6.54 kg
- Filler metal to buyP = M / η = 3.93 / 0.65 … 6.54 / 0.55 = 6.03–11.90 kg η 0.55–0.65: typical value for process 111.
Reference values — 111 — covered electrode, level Cper 1 m of weld
| Throat | A, mm² | Weld metal, kg/m | Filler metal, kg/m |
|---|---|---|---|
| a 3 mm | 9.0–16.6 | 0.07–0.13 | 0.10–0.24 |
| a 4 mm | 16.0–27.7 | 0.13–0.22 | 0.19–0.40 |
| a 5 mm | 25.0–41.7 | 0.20–0.33 | 0.30–0.60 |
| a 6 mm | 36.0–58.4 | 0.28–0.46 | 0.43–0.84 |
| a 8 mm | 64.0–100.3 | 0.50–0.79 | 0.77–1.44 |
| a 10 mm | 100.0–153.3 | 0.79–1.20 | 1.20–2.19 |
| a 12 mm | 144.0–208.0 | 1.13–1.63 | 1.73–2.97 |
Weld cross-sectionto scale
Real dimensions. Excess weld metal is drawn at the maximum of the chosen level; the dashed line is a flush weld.
ResultEN ISO 5817 · C
6.03–11.90 kg
of covered electrode for 20 m of weld
- per metre
- for 20 m
- Weld cross-section A
- 25.0–41.7 mm²
- Weld metal
- 0.20–0.33 kg
- 3.93–6.54 kg
- Filler metal
- 0.30–0.60 kg
- 6.03–11.90 kg
Vertical and overhead welding usually takes more.
From the catalogue, for this result
- See product →GARANTAWS E7018 · EN ISO E 42 2 B 42 H10Ø 3.25 · 6 kg → 2 × 6 kg
- See product →GARANT AC/DCAWS E7016 · EN ISO E 42 3 B 12 H10Ø 2.5 · 4.3 kg → 3 × 4.3 kg
- See product →GARANT BRAWS E7016 · EN ISO E 42 2 B 12 H10Ø 2.5 · 4.3 kg → 3 × 4.3 kg
Standards and sources
- EN ISO 9692-1:2013 — joint preparation, steel; processes 111, 13x, 141
- EN ISO 5817:2023 — quality levels B, C and D; imperfections 502, 503 and 504
- EN ISO 2553:2019 — throat a of the fillet weld; z = a·√2
- EN ISO 4063:2023 — process numbers
- EN 10088-1 — density of stainless steels
- EN ISO 2401:2018 — deposition efficiency η: definition and test method (covered electrodes)
Indicative results: good for planning and ordering material; they do not replace the WPS.
← All calculators