We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Creep-resisting Cr-Mo steels

SG Mo TIG — ER 80 S-G (mod.) (ER 70 S-A1)

TIG rod
also as: solid wire

Choose the size

  • Ø 1.6 × 1000 mm · 5 kg
    ≈ 5 kg
  • Ø 2 × 1000 mm · 5 kg
    ≈ 5 kg
  • Ø 2.4 × 1000 mm · 5 kg
    ≈ 5 kg
  • Ø 3.2 × 1000 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 1000 mm · 5 kg
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 141 · η 0.94
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

4.82–6.52 kg

of SG Mo TIG for 10 m of weld

2 packs of 5 kg

Calculated with: η 0.9405: TIG with filler rod, 0.99 less the stub s of a 1000 mm rod · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →

Field of application

  • Copper coated wire for GMAW and rod TIG welding in boiler pressure vessel, pipework and crane construction as well as in structural steel engineering
  • High quality, very tough deposit of high crack resistance and non-aging
  • Recommended for service in temperature range (-40°C) for TIG, or (-20°C) for GMAW to (+550°C)
  • Good copper bonding with low total copper content. Very good welding and flow characteristics
  • Preheating interpass and postweld heat treatment as required by base metal
  • Shielding gases: MAG; Ar+CO2, mix gases, TIG; %100 Ar

Base metals

S355J2G3L320-L415NBL320MB-L415MBP255G1THP235GH-P355GHP255NH16Mo317MnMoV6-420MnMoNi5-520MnMoNi4-5GE240-GE30022Mo4S255N-S460NP255NH-P460 NH
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC−
Shielding gas100% Ar

Classification and approvals

Classification

AWS classER 80 S-G (mod.) (ER 70 S-A1)
EN ISO classW MoSi

Approvals

  • CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C0.10
Mn1.10
Mo0.50
Si0.60
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 460 MPa
Tensile strength (Rm)550–670 MPa
Elongation (A5)min. 22 %
Impact energy (KV)min. 47 J (−20 °C)

How to weld

Process

ShieldingRequires shielding gas

Treatment and preparation

Pre-heatingas required by the base metal
Interpass temperatureas required by the base metal
Post-weld heat treatmentas required by the base metal
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
DT-SG Mo TIGDratecW MoSi560–650 MPa> 80 JTo order · price and lead time in the quote