We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Creep-resisting Cr-Mo steels

SG CrMo 1 Si MIG — ER 80 S-G

solid wire
also as: TIG rod

Choose the size

  • Ø 0.8 mm · BS 300
    ≈ 15 kg
  • Ø 0.8 mm · D 300
    ≈ 15 kg
  • Ø 1 mm · BS 300
    ≈ 15 kg
  • Ø 1 mm · D 300
    ≈ 15 kg
  • Ø 1.2 mm · BS 300
    ≈ 15 kg
  • Ø 1.2 mm · D 300
    ≈ 15 kg
  • Ø 1.6 mm · BS 300
    ≈ 15 kg
  • Ø 1.6 mm · D 300
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 135 · η 0.92–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

4.62–6.66 kg

of SG CrMo 1 Si MIG for 10 m of weld

1 pack of 15 kg

Calculated with: η 0.92–0.98: typical value for process 135 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →

Field of application

  • Used for the welding of high heat resisting. Cr-Mo alloyed steels which are used for the production of boilers tubes and pipes and nitrided steels
  • Weld metal is resistant to temperatures up to +570°C
  • Shielding gases: MAG; Ar+CO2 and Ar+O2 mix gases, TIG; pure Ar gas can be used

Base metals

13CrMo4-515CrMo542CrMo416CrMoV425CrMo424CrMo5G22CrMo5-4G17CrMo5-5
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC+
Shielding gasAr + CO2, Ar + O2

Classification and approvals

Classification

AWS classER 80 S-G
EN ISO classG CrMo 1 Si

Approvals

  • CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C0.10
Cr1.20
Mn1.00
Mo0.50
Si0.60
Values in mass %.

Mechanical properties

after heat treatment: 680 °C / 1 h / 300 °C (air)
Yield strength (Rp0.2)min. 470 MPa
Tensile strength (Rm)550–670 MPa
Elongation (A5)min. 20 %
Impact energy (KV)min. 47 J (20 °C)

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
DT-SG CrMo1 MIGDratecG CrMo1Si570–680 MPa> 68 JTo order · price and lead time in the quote