Gedik · Creep-resisting Cr-Mo steels
OPUS CMV — E 9018-G H4
covered electrode · stick electrodebasic coating
Choose the size
- Ø 2.5 × 350 mm≈ 5 kg
- Ø 3.2 × 350 mm≈ 5 kg
- Ø 4 × 350 mm≈ 5 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
6.97–11.14 kg
of OPUS CMV for 10 m of weld
3 packs of ≈ 5 kg
Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm
100 °C
Minimum preheat and minimum interpass temperature
EN 1011-2, annex C, method B · rounded up to 5 °C
✓ Within the range of method B.
Calculated with: HD 5 ml/100 g from this product's class H5 · 111 — basic electrode: 24 V, 160 A, 15 cm/min
See the full calculation →Field of application
- V-alloyed steels such as 14MoV6-3
- Electrode coating of basic character
- Serviceability at temperatures up to 580°C
- Pre-heating and interpass temperatures: 200°C-300°C
- Requirement of re-drying for min. 2 hours at the temperatures between 300°C and 350°C
Base metals
14MoV6-324CrMoV5-521CrMoV5-721CrMoV5-11G17CrMoV5-11
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up |
|---|---|
| Polarity | DC+ |
Classification and approvals
Classification
| AWS class | E 9018-G H4 |
|---|---|
| EN ISO class | E MoV B 42 H5 |
Approvals
- CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the weld metal
| C | 0.06 |
|---|---|
| V | 0.50 |
| Cr | 0.45 |
| Mn | 1.20 |
| Mo | 1.00 |
| Si | 0.30 |
Values in mass %.
Mechanical properties
| Service temperature | max. 580 °C |
|---|
after heat treatment: 710 ± 20 °C / 1 h / 300 °C (air)
| Yield strength (Rp0.2) | min. 530 MPa |
|---|---|
| Tensile strength (Rm) | min. 620 MPa |
| Elongation (A5) | min. 18 % |
| Impact energy (KV) | min. 47 J (20 °C) |
How to weld
Treatment and preparation
| Re-drying | 300–350 °C / min. 2 h |
|---|---|
| Pre-heating | 200–300 °C |
| Interpass temperature | 200–300 °C |
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 2.5 mm | 350 mm | 65–90 A |
| 3.2 mm | 350 mm | 90–130 A |
| 4 mm | 350 mm | 140–180 A |
FERVEO guidance
By problem
Structural steels