Gedik · Creep-resisting Cr-Mo steels

OPUS CMV — E 9018-G H4
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-OPUS-CMV-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 9018-G H4
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
65–90 A
GDK-3010100789
3.2 mm
350 mm
90–130 A
GDK-3010100792
4 mm
350 mm
140–180 A
GDK-3010100795
Application
- V-alloyed steels such as 14MoV6-3
- Electrode coating of basic character
- Serviceability at temperatures up to 580°C
- Pre-heating and interpass temperatures: 200°C-300°C
- Requirement of re-drying for min. 2 hours at the temperatures between 300°C and 350°C
Classification
AWS class
E 9018-G H4
EN ISO class
E MoV B 42 H5
Approvals
CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
V
Cr
Mn
Mo
Si
0.06
0.50
0.45
1.20
1.00
0.30
Values in mass %.
Base metals
14MoV6-3 · 24CrMoV5-5 · 21CrMoV5-7 · 21CrMoV5-11 · G17CrMoV5-11
Mechanical properties
Service temperature
max. 580 °C
after heat treatment: 710 ± 20 °C / 1 h / 300 °C (air)
Yield strength (Rp0.2)
min. 530 MPa
Tensile strength (Rm)
min. 620 MPa
Elongation (A5)
min. 18 %
Impact energy (KV)
min. 47 J (20 °C)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPUS-CMV-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue