Gedik · Creep-resisting Cr-Mo steels
OPUS CM-15 — E 8015-B2 H4
covered electrode · stick electrodebasic coating
Choose the size
- Ø 2.5 × 350 mm≈ 5 kg
- Ø 3.2 × 350 mm≈ 5 kg
- Ø 4 × 450 mm≈ 5 kg
- Ø 5 × 450 mm≈ 5 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 111 · η 0.66
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
6.87–9.29 kg
of OPUS CM-15 for 10 m of weld
2 packs of ≈ 5 kg
Calculated with: η 0.66 — from the datasheet (recovery 125 %, Ø 2.5 × 350 mm) · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm
100 °C
Minimum preheat and minimum interpass temperature
EN 1011-2, annex C, method B · rounded up to 5 °C
✓ Within the range of method B.
Calculated with: HD 5 ml/100 g from this product's class H5 · 111 — basic electrode: 24 V, 160 A, 15 cm/min
See the full calculation →Field of application
- Welding of steam boilers and steam pipes made of Cr-Mo alloyed heat resistant steels, cementation steels, nitrided steels
- Resistance of weld metal to operating temperatures of values up to 570°C.
- Weld metal recovery of approx. 125%
- It can be used in position welding with lower heat input
- Usable with short arc in (-) pole for root pass welding with excellent penetration
- Requirement of re-drying for minimum 2 hours at the temperatures between 300°C and 350°C
Base metals
13CrMo4-515CrMo516CrMoV4G17CrMo5-5GS22Mo4G22CrMo5-4A193 Gr.B7A335 Gr.P11
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up |
|---|---|
| Polarity | DC+ |
Classification and approvals
Classification
| AWS class | E 8015-B2 H4 |
|---|---|
| EN ISO class | E CrMo1 B 42 H5 |
Approvals
- CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the weld metal
| C | 0.07 |
|---|---|
| Cr | 1.10 |
| Mn | 0.80 |
| Mo | 0.50 |
| Si | 0.50 |
Values in mass %.
Mechanical properties
| Service temperature | max. 570 °C |
|---|
after heat treatment: 690 °C / 1 h / 300 °C (air)
| Yield strength (Rp0.2) | min. 460 MPa |
|---|---|
| Tensile strength (Rm) | 580–740 MPa |
| Elongation (A5) | min. 20 % |
| Impact energy (KV) | min. 47 J (20 °C) |
How to weld
Process
| Recovery | approx. 125 % |
|---|
Treatment and preparation
| Re-drying | 300–350 °C / min. 2 h |
|---|
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 2.5 mm | 350 mm | 80–110 A |
| 3.2 mm | 350 mm | 100–140 A |
| 4 mm | 450 mm | 140–190 A |
| 5 mm | 450 mm | 190–240 A |
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same EN ISO designation