We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Creep-resisting Cr-Mo steels

OPUS 9 CM — E 8018-B8 H4

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 350 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 450 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm

100 °C

Minimum preheat and minimum interpass temperature

EN 1011-2, annex C, method B · rounded up to 5 °C

✓ Within the range of method B.

Calculated with: HD 5 ml/100 g from this product's class H5 · 111 — basic electrode: 24 V, 160 A, 15 cm/min

See the full calculation →

Field of application

  • Welding of boilers, pressure vessel steels, pipe steels and cast steels
  • Electrode coating of basic character
  • Electrode content of wt% 9 Chromium wt% 1 Molybdenum
  • Serviceability at temperatures of values up to 650°C
  • Requirement of re-drying for min. 2 hours at the temperatures between 300°C and 350°C

Base metals

X12CrMo9-1X7CrMo9-1GX12CrMo1O
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS classE 8018-B8 H4
EN ISO classE CrMo9 B 4 2 H5
AWS A5.4E 505-15

Approvals

  • CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.07
Cr9.00
Mn0.70
Mo1.00
Si0.40
Values in mass %.

Mechanical properties

Service temperaturemax. 650 °C
after heat treatment: 740–780 °C / 2 h / 300 °C (air)
Yield strength (Rp0.2)min. 460 MPa
Tensile strength (Rm)min. 590 MPa
Elongation (A5)min. 19 %
Impact energy (KV)min. 34 J (20 °C)

How to weld

Treatment and preparation

Re-drying300–350 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2.5 mm350 mm60–90 A
3.2 mm350 mm90–130 A
4 mm450 mm120–160 A
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassAvailability
OPUS 9 CM-15GedikE CrMo9 B 42 H5To order · price and lead time in the quote