Download PDF
← Technical datasheet
Gedik · Creep-resisting Cr-Mo steels
FERVEO

OPUS 9 CM — E 8018-B8 H4

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-OPUS-9-CM-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 8018-B8 H4
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
60–90 A
GDK-3010100849
3.2 mm
350 mm
90–130 A
GDK-3010100852
4 mm
450 mm
120–160 A
GDK-3010100855
Application
  • Welding of boilers, pressure vessel steels, pipe steels and cast steels
  • Electrode coating of basic character
  • Electrode content of wt% 9 Chromium wt% 1 Molybdenum
  • Serviceability at temperatures of values up to 650°C
  • Requirement of re-drying for min. 2 hours at the temperatures between 300°C and 350°C
Classification
AWS class
E 8018-B8 H4
EN ISO class
E CrMo9 B 4 2 H5
AWS A5.4
E 505-15
Approvals

CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.07
9.00
0.70
1.00
0.40
Values in mass %.
Base metals

X12CrMo9-1 · X7CrMo9-1 · GX12CrMo1O

Mechanical properties
Service temperature
max. 650 °C
after heat treatment: 740–780 °C / 2 h / 300 °C (air)
Yield strength (Rp0.2)
min. 460 MPa
Tensile strength (Rm)
min. 590 MPa
Elongation (A5)
min. 19 %
Impact energy (KV)
min. 34 J (20 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPUS-9-CM-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Creep-resisting Cr-Mo steels
FERVEO

OPUS 9 CM — E 8018-B8 H4

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-OPUS-9-CM-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPUS-9-CM-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue