Gedik · Creep-resisting Cr-Mo steels
OPUS 2 CML — E 8018-B3 L H4
covered electrode · stick electrodebasic coating
Choose the size
- Ø 2.5 × 350 mm≈ 5 kg
- Ø 3.2 × 350 mm≈ 5 kg
- Ø 4 × 450 mm≈ 5 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
6.97–11.14 kg
of OPUS 2 CML for 10 m of weld
3 packs of ≈ 5 kg
Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm
100 °C
Minimum preheat and minimum interpass temperature
EN 1011-2, annex C, method B · rounded up to 5 °C
✓ Within the range of method B.
Calculated with: HD 5 ml/100 g from this product's class H5 · 111 — basic electrode: 24 V, 160 A, 15 cm/min
See the full calculation →Field of application
- Applicability in welding of heat-resisting steels containing 2% Cr - 1% Mn and similar alloys
- Electrode with basic-type coating
- Formation of more ductile and less hard weld metal due to low carbon content
- Serviceability at temperatures of values up to 600 °C
- Recommended pre-heating and post-heat treatment during welding processes
- Requirement of re-drying for min. 2 hours at the temperatures between 300°C and 350°C
Base metals
2% Cr-1% Mo SteelsA335 Gr. P22
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up |
|---|---|
| Polarity | DC+ |
Classification and approvals
Classification
| AWS class | E 8018-B3 L H4 |
|---|---|
| EN ISO class | E CrMo2L B 42 H5 |
Approvals
- CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the weld metal
| C | 0.04 |
|---|---|
| Cr | 2.20 |
| Mn | 0.60 |
| Mo | 1.10 |
| Si | 0.60 |
Values in mass %.
Mechanical properties
| Service temperature | max. 600 °C |
|---|
after heat treatment: 690–750 °C / 1 h / 300 °C (air)
| Yield strength (Rp0.2) | min. 530 MPa |
|---|---|
| Tensile strength (Rm) | min. 620 MPa |
| Elongation (A5) | min. 18 % |
| Impact energy (KV) | min. 47 J (20 °C) |
How to weld
Treatment and preparation
| Re-drying | 300–350 °C / min. 2 h |
|---|---|
| Pre-heating | recommended |
| Post-weld heat treatment | recommended |
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 2.5 mm | 350 mm | 80–110 A |
| 3.2 mm | 350 mm | 100–140 A |
| 4 mm | 450 mm | 130–180 A |
FERVEO guidance
By problem
Structural steels