Gedik · Creep-resisting Cr-Mo steels

OPUS 2 CML — E 8018-B3 L H4
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-OPUS-2-CML-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 8018-B3 L H4
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
80–110 A
GDK-3010100825
3.2 mm
350 mm
100–140 A
GDK-3010100828
4 mm
450 mm
130–180 A
GDK-3010100831
Application
- Applicability in welding of heat-resisting steels containing 2% Cr - 1% Mn and similar alloys
- Electrode with basic-type coating
- Formation of more ductile and less hard weld metal due to low carbon content
- Serviceability at temperatures of values up to 600 °C
- Recommended pre-heating and post-heat treatment during welding processes
- Requirement of re-drying for min. 2 hours at the temperatures between 300°C and 350°C
Classification
AWS class
E 8018-B3 L H4
EN ISO class
E CrMo2L B 42 H5
Approvals
CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.04
2.20
0.60
1.10
0.60
Values in mass %.
Base metals
2% Cr-1% Mo Steels · A335 Gr. P22
Mechanical properties
Service temperature
max. 600 °C
after heat treatment: 690–750 °C / 1 h / 300 °C (air)
Yield strength (Rp0.2)
min. 530 MPa
Tensile strength (Rm)
min. 620 MPa
Elongation (A5)
min. 18 %
Impact energy (KV)
min. 47 J (20 °C)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPUS-2-CML-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue