We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Creep-resisting Cr-Mo steels

IMPULS — E 7018-A1

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 350 mm · 4.6 kg
    ≈ 4.6 kg
  • Ø 3.25 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 450 mm · 6 kg
    ≈ 6 kg
  • Ø 5 × 450 mm · 6 kg
    ≈ 6 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

6.97–11.14 kg

of IMPULS for 10 m of weld

3 packs of 4.6 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →

Field of application

Covered electrode with 0.4 % Mo in the all-weld metal, suitable for steel 16Mo3. Owing to a small Ni addition, tough at low temperatures down to -30 °C, also well suited to pipeline steels and high-strength fine-grain structural steels.

Base metals

Non-alloy structural steels: S275 to S355Fine-grain structural steels: S275 to S500Shipbuilding steels: A32/36, D32/36, E32/36, F32/36, A/D/E/F40Pressure vessel steels: P195 to P500, 16Mo3Pipeline steels: L210 to L450Cast steels: GE200 , GE240, GP240, G20Mo5, G21Mn5Reinforcing steels: BSt 420, BSt 500
PositionsPA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS classE 7018-A1
EN ISO classE Mo Z B 42

Approvals

  • DB, TÜV, CE
According to the Kjellberg 2019 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.08
Mn1.40
Mo0.40
Ni0.60
Si0.50
Values in mass %.

Mechanical properties

after stress relieving
Yield strength (Rp0.2)> 550 MPa
Tensile strength (Rm)580–620 MPa
Elongation (A5)> 24 %
Impact energy (KV)> 100 J (−20 °C)

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
2.5 mm350 mm90–110 A
3.25 mm350 mm110–150 A
4 mm450 mm140–180 A
5 mm450 mm180–220 A
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same AWS designation
ProductClassAvailability
MOBKjellbergE7018-A1To order · price and lead time in the quote
OPUS MOBGedikE7018-A1 H4To order · price and lead time in the quote