We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Carbon steels

GARANT X — E 7018-1

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 350 mm · 4.3 kg
    ≈ 4.3 kg
  • Ø 3.25 × 350 mm · 4.5 kg
    ≈ 4.5 kg
  • Ø 4 × 450 mm · 5.6 kg
    ≈ 5.6 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

6.97–11.14 kg

of GARANT X for 10 m of weld

3 packs of 4.3 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm

100 °C

Minimum preheat and minimum interpass temperature

EN 1011-2, annex C, method B · rounded up to 5 °C

✓ Within the range of method B.

Calculated with: HD 5 ml/100 g from this product's class H5 · 111 — basic electrode: 24 V, 160 A, 15 cm/min

See the full calculation →

Field of application

Basic electrode for high-quality, crack-resistant joining in mechanical engineering, steel construction, boiler construction and shipbuilding. Excellent welding characteristics in positional welding.

Base metals

Non-alloy structural steels: S275 to S355Fine-grain structural steels: S275 to S460Shipbuilding steels: A32/36, D32/36, E32/36, F32/36, A/D/E40Pressure vessel steels: P195 to P460Pipeline steels: L210 to L450Cast steels: GE200, GE240, GP240, G20Mo5, G21Mn5Reinforcing steels: BSt 420, BSt 500
PositionsPA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS classE 7018-1
EN ISO classE 46 3 B 22 H5

Approvals

  • TÜV, CE
According to the Kjellberg 2019 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.07
Mn1.00
Si0.60
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)> 460 MPa
Tensile strength (Rm)550–600 MPa
Elongation (A5)> 25 %
Impact energy (KV)> 70 J (−20 °C)

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
2.5 mm350 mm80–100 A
3.25 mm350 mm100–130 A
4 mm450 mm120–160 A
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same AWS designation
ProductClassRmKVAvailability
GARANT KKjellbergE7018-1570–620 MPa> 100 J (−40 °C)To order · price and lead time in the quote
GARANT SKjellbergE7018-1540–600 MPa> 90 J (−40 °C)To order · price and lead time in the quote
LASER B 50GedikE7018-1 H4510–630 MPamin. 47 J (−50 °C)To order · price and lead time in the quote
LASER B 55GedikE7018-1 H4530–650 MPamin. 47 J (−50 °C)To order · price and lead time in the quote
LASER B 55-SGedikE7018-1 H4530–650 MPamin. 47 J (−60 °C)To order · price and lead time in the quote