Heat-resistant Cr-Mo steels
FERVEO CMO 1 MIG
solid wireCatalogue only
also as: TIG rodflux-cored wire (FCW)
AWS class
EN ISO 21952-A G CrMo1Si
EN ISO class
G/W CrMo1Si
Tensile strength (Rm)
570–680 MPa
Classification
| AWS class | EN ISO 21952-A G CrMo1Si |
|---|---|
| EN ISO class | G/W CrMo1Si |
| Other standards | ISO 20172: Gruppe 5.1 · TÜV Kennblatt 1000: Gruppe 6 |
Purpose
- Solid Cr-Mo wire (1.2% Cr–0.5% Mo, EN ISO G/W CrMo1Si) — MIG/MAG welding of heat-resistant Cr-Mo steels up to 570°C, for piping and boilers.
Why it works
Adding chromium to molybdenum steps up creep and hot-oxidation resistance versus the FERVEO CMO Mo family — the same alloying principle as the FERVEO CMO 1B HD P2 80/15 electrodes, here in solid-wire form for MIG/MAG.
Fields of application
- Low-alloy Cr-Mo steel piping and boilers, continuous service up to 570°C.
Chemical composition
| Element | Typical, % |
|---|---|
| C | 0.1 |
| Cr | 1.2 |
| Mn | 0.9 |
| Mo | 0.5 |
| Si | 0.6 |
Mechanical properties
| Tensile strength (Rm) | 570–680 MPa |
|---|---|
| Yield strength (Rp0.2) | 480–500 MPa |
| Elongation (A5) | 20 % |
| Impact energy (KV) | 68 J |
Process
| Polarity | DC+ |
|---|---|
| Shielding gas | M1,M2,M3,C1 |
Sizes and part numbers
| Ø | Request |
|---|---|
| 0.8 mm | |
| 1 mm | |
| 1.2 mm | |
| 1.6 mm |
Supply programme
spools D100 / D200 / K200 / K300
Base metals
1.72181.72251.73351.73371.73501.73541.7357
Advantages
- Solid-wire format — mechanized/semi-automatic welding productivity and lower starting hydrogen than a covered electrode.
- Same Cr-Mo alloy grade as the FERVEO CMO 1B HD P2 80/15 electrodes — consistent in-service behavior across processes.
Limitations
- For higher temperature or pressure duty, see the higher steps of the FERVEO CMO family (2/5/9/91).