Gedik · Low-alloy steels
ER 110 SG G 69 4 MIG — ER 110S-G
solid wire
Choose the size
- Ø 0.8 mm · BS 300≈ 15 kg
- Ø 0.8 mm · D 300≈ 15 kg
- Ø 1 mm · BS 300≈ 15 kg
- Ø 1 mm · D 300≈ 15 kg
- Ø 1.2 mm · BS 300≈ 15 kg
- Ø 1.2 mm · D 300≈ 15 kg
- Ø 1.6 mm · BS 300≈ 15 kg
- Ø 1.6 mm · D 300≈ 15 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 135 · η 0.92–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
4.62–6.66 kg
of ER 110 SG G 69 4 MIG for 10 m of weld
1 pack of 15 kg
Calculated with: η 0.92–0.98: typical value for process 135 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Field of application
- ER 110 SG is low alloyed and high strength GMAW wire and GTAW rods
- It is used for joining of the high strength low alloy steels and the fine grained constructional steels with minimum yield strength of 690 N/mm2, especially Hardox and Weldox sheets
- Boilers, pressure vessels, pipelines, structure steels are the other application areas
- Weld metal has high impact and toughness at low temperatures
- Pre-heat can be according to the base material
- Shielding gases - MAG: (Ar+% 15-25 CO2) / TIG: (Ar)
Base metals
S690QL690MN-A-XTRA 70USS-T1BH 70 VHY 100ASTM A514 Gr.F
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down |
|---|---|
| Polarity | DC+ |
| Shielding gas | Ar + 15–25% CO2 |
Classification and approvals
Classification
| AWS class | ER 110S-G |
|---|---|
| EN ISO class | G 69 4 M21 Mn3Ni1CrMo |
Approvals
- CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the wire
| C | 0.09 |
|---|---|
| Cr | 0.30 |
| Cu | 0.20 |
| Mn | 1.70 |
| Mo | 0.50 |
| Ni | 2.00 |
| Si | 0.75 |
Values in mass %.
Mechanical properties
| Yield strength (Rp0.2) | min. 690 MPa |
|---|---|
| Tensile strength (Rm) | min. 760 MPa |
| Elongation (A5) | 19 % |
| Impact energy (KV) | min. 47 J (−30 °C) |
How to weld
Process
| Shielding | Requires shielding gas |
|---|
Treatment and preparation
| Pre-heating | according to the base material |
|---|
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same EN ISO designation
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| DT-NiMoCr MIGDratec | G 69 4 M21 Mn3Ni1CrMo | 770–940 MPa | > 47 J (−40 °C) | To order · price and lead time in the quote |
Similar
ISO 16834-A: same strength (69), equal or better toughness (47 J at −40 °C)
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| ER 110 SG G 69 5 MIGGedik | G 69 5 M21 Mn3Ni1CrMo | 770–940 MPa | min. 47 J (−50 °C) | To order · price and lead time in the quote |