Gedik · Low-alloy steels
ER 110 SG G 69 5 MIG — ER110S-G
solid wire
Choose the size
- Ø 1 mm · 15 kg≈ 15 kg
- Ø 1.2 mm · 15 kg≈ 15 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 135 · η 0.92–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
4.62–6.66 kg
of ER 110 SG G 69 5 MIG for 10 m of weld
1 pack of 15 kg
Calculated with: η 0.92–0.98: typical value for process 135 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Field of application
- ER 110 SG is low alloyed and high strength GMAW wire and GTAW rods
- It is used for joining of the high strength low alloy steels and the fine grained constructional steels with minimum yield strength of 690 N/mm2, especially Hardox and Weldox sheets
- Boilers, pressure vessels, pipelines, structure steels are the other application areas
- Weld metal has high impact and toughness at low temperatures
- Pre-heat can be according to the base material
- Shielding gases - MAG: (Ar+% 15-25 CO2) / TIG: (Ar)
Base metals
S690QL690MN-A-XTRA 70USS-T1BH 70 VHY 100ASTM A514 Gr.F
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up |
|---|---|
| Polarity | DC+ |
| Shielding gas | Ar + 15–25% CO2 |
Classification and approvals
Classification
| AWS class | ER110S-G |
|---|---|
| EN ISO class | G 69 5 M21 Mn3Ni1CrMo |
Composition and properties
Chemical composition of the wire
| C | 0.12 |
|---|---|
| Cr | 0.30 |
| Cu | 0.35 |
| Mn | 1.70 |
| Mo | 0.30 |
| Ni | 1.40 |
| Si | 0.50 |
Values in mass %.
Mechanical properties
| Yield strength (Rp0.2) | min. 690 MPa |
|---|---|
| Tensile strength (Rm) | 770–940 MPa |
| Elongation (A5) | min. 17 % |
| Impact energy (KV) | min. 47 J (−50 °C) |
How to weld
Process
| Shielding | Requires shielding gas |
|---|
Treatment and preparation
| Pre-heating | according to the base material |
|---|
FERVEO guidance
By problem
Structural steels