We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX R 385 — E 385 -16

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2.5 × 250 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 350 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.11–11.36 kg

of ELOX R 385 for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 385

Not recommendedFN — (WRC-1992)

  • Fully austenitic weld, as expected from a superaustenitic filler (type 385).
  • Superaustenitic filler (type 385) with carbon steel: not recommended for this joint; use 309L or 309LMo.

Maximum dilution with this filler: 74.5 %

Calculated with: filler 385 — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

  • Resistant to intergranular corrosion (wet corrosion up to 350 °C)
  • High corrosion resistance, similar to that of matching steels and cast steels, especially in reducing media
  • For joining and surfacing matching austenitic CrNiMoCu steels and cast steels
  • For joining these steels to non-alloy and low-alloy steels and cast steels
  • Redrying is required for at least 2 hours at 120 °C to 200 °C

Base metals

EN & DIN:
X5NiCrMoCuNb 20 18X5NiCrMoCuTi 20 18X2NiCrMoCu 25 20 5X5NiCrMoCuNb 22 18G-X7CrNiMoCuNb 18 18G-X7NiCrMoCuNb 25 20
AISI:
317L904L
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS classE 385 -16
EN ISO classE 20 25 5 Cu N L R 32

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C< 0.03
Cr20.0
Cu1.50
Mn1.00
Mo4.50
Ni25.0
Si0.75
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 400 MPa
Tensile strength (Rm)550–700 MPa
Elongation (A5)min. 30 %
Impact energy (KV)min. 47 J (20 °C)
Service temperaturemax. 350 °C

How to weld

Treatment and preparation

Re-drying120–200 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2.5 mm250 mm50–90 A
3.2 mm350 mm80–120 A
4 mm350 mm110–160 A
FERVEO guidance
By problem
Corrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
FINOX 4519 ACKjellbergE 20 25 5 Cu N L R 32> 550 MPa> 55 J (room temperature)To order · price and lead time in the quote