Download PDF
← Technical datasheet
Gedik · Stainless steels
FERVEO

ELOX R 385 — E 385 -16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-385-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 385 -16
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
50–90 A
GDK-3010101428
3.2 mm
350 mm
80–120 A
GDK-3010101433
4 mm
350 mm
110–160 A
GDK-3010101438
Application
  • Resistant to intergranular corrosion (wet corrosion up to 350 °C)
  • High corrosion resistance, similar to that of matching steels and cast steels, especially in reducing media
  • For joining and surfacing matching austenitic CrNiMoCu steels and cast steels
  • For joining these steels to non-alloy and low-alloy steels and cast steels
  • Redrying is required for at least 2 hours at 120 °C to 200 °C
Classification
AWS class
E 385 -16
EN ISO class
E 20 25 5 Cu N L R 32
Approvals

TSE, CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Cu
Mn
Mo
Ni
Si
< 0.03
20.0
1.50
1.00
4.50
25.0
0.75
Values in mass %.
Base metals

EN & DIN: X5NiCrMoCuNb 20 18 · X5NiCrMoCuTi 20 18 · X2NiCrMoCu 25 20 5 · X5NiCrMoCuNb 22 18 · G-X7CrNiMoCuNb 18 18 · G-X7NiCrMoCuNb 25 20

AISI: 317L · 904L

Mechanical properties
Yield strength (Rp0.2)
min. 400 MPa
Tensile strength (Rm)
550–700 MPa
Elongation (A5)
min. 30 %
Impact energy (KV)
min. 47 J (20 °C)
Service temperature
max. 350 °C
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-385-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Stainless steels
FERVEO

ELOX R 385 — E 385 -16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-385-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
120–200 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-385-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue