We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Stainless steels

FINOX 4519 AC — E 385-16

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2.5 × 300 mm · 4 kg
    ≈ 4 kg
  • Ø 3.25 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 350 mm · 5 kg
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.11–11.36 kg

of FINOX 4519 AC for 10 m of weld

3 packs of 4 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 385

Not recommendedFN — (WRC-1992)

  • Fully austenitic weld, as expected from a superaustenitic filler (type 385).
  • Superaustenitic filler (type 385) with carbon steel: not recommended for this joint; use 309L or 309LMo.

Maximum dilution with this filler: 74.5 %

Calculated with: filler 385 — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

Electrode for joining and surfacing on matching austenitic CrNiMoCu steels and cast steels. The weld metal has increased corrosion resistance to reducing media.

Base metals

1.4500 GX 7 NiCrMoCuNb 25-201.4505 X 4 NiCrMoCuNb 20-18-21.4506 X 5 NiCrMoCuTi 20-181.4531 GX 2 NiCrMoCuN 20-181.4536 GX 2 NiCrMoCuN 25-201.4538 GX 1 NiCrMoCuN 25-20-51.4539 X 1 NiCrMoCu 25-20-51.4585 GX 7 CrNiMoCuNb 18-181.4586 X 5 NiCrMoCuNb 22-18
PositionsPA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS classE 385-16
EN ISO classE 20 25 5 Cu N L R 32
Material no. (W.-Nr.)1.4519

Approvals

  • CE
According to the Kjellberg 2019 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.03
Cr20.0
Cu1.50
Mn1.50
Mo4.50
Ni25.0
Si0.90
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)> 400 MPa
Tensile strength (Rm)> 550 MPa
Elongation (A5)> 35 %
Impact energy (KV)> 55 J (room temperature)

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
2.5 mm300 mm70–100 A
3.25 mm350 mm110–140 A
4 mm350 mm130–170 A
FERVEO guidance
By problem
Corrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
ELOX R 385GedikE 20 25 5 Cu N L R 32550–700 MPamin. 47 J (20 °C)To order · price and lead time in the quote