We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX R 347 — E 347-16

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2 × 250 mm
    ≈ 5 kg
  • Ø 2.5 × 250 mm
    ≈ 5 kg
  • Ø 3.2 × 300 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 350 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.02–11.21 kg

of ELOX R 347 for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 347

Not recommendedFN — (WRC-1992)

  • The weld sits close to the martensite boundary: keep the dilution under control.
  • Fully austenitic: sensitive to hot cracking.

Maximum dilution with this filler: 10.5 %

Calculated with: filler 347 — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

  • For welding tanks and pipes for milk and beer
  • Also for welding valves for acids, gas, steam and water
  • Resistant to acids and corrosion; stabilised with Nb. The weld metal withstands temperatures up to +400 °C
  • Redrying is required for at least 2 hours at 120 °C to 200 °C

Base metals

EN:
X6CrNiNb 18 10X6CrNiTi 18 10G-X5CrNiNb 18 9X5CrNi 18 10X12CrNiTi 18 9G-X10CrNi 18 8X10CrNiNb 18 10X2CrNi 19 11
AISI:
347321304304LN
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS classE 347-16
EN ISO classE 19 9 Nb R 32

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.04
Cr19.8
Mn0.90
Nbpresent
Ni10.0
Si0.80
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 390 MPa
Tensile strength (Rm)570–740 MPa
Elongation (A5)min. 35 %
Impact energy (KV)min. 47 J (20 °C)
Service temperaturemax. 400 °C

How to weld

Treatment and preparation

Re-drying120–200 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2 mm250 mm40–60 A
2.5 mm250 mm50–90 A
3.2 mm300 mm80–120 A
3.2 mm350 mm80–120 A
4 mm350 mm110–160 A
FERVEO guidance
By problem
Corrosion-resistant alloys
Alternatives in the catalogue
Same class
same AWS designation
ProductClassRmKVAvailability
FINOX 4551 ACKjellbergE347-16> 550 MPa> 55 J (room temperature)To order · price and lead time in the quote