Download PDF
← Technical datasheet
Gedik · Stainless steels
FERVEO

ELOX R 347 — E 347-16

Technical datasheet · covered electrode · stick electrode · Ø 2 – 4 mm
FT-ELOX-R-347-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 347-16
Diameters
Ø 2 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2 mm
250 mm
40–60 A
GDK-3010101388
2.5 mm
250 mm
50–90 A
GDK-3010101393
3.2 mm
300 mm
80–120 A
GDK-3010101398
3.2 mm
350 mm
80–120 A
GDK-3010101403
4 mm
350 mm
110–160 A
GDK-3010101408
Application
  • For welding tanks and pipes for milk and beer
  • Also for welding valves for acids, gas, steam and water
  • Resistant to acids and corrosion; stabilised with Nb. The weld metal withstands temperatures up to +400 °C
  • Redrying is required for at least 2 hours at 120 °C to 200 °C
Classification
AWS class
E 347-16
EN ISO class
E 19 9 Nb R 32
Approvals

TSE, CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Nb
Ni
Si
0.04
19.8
0.90
present
10.0
0.80
Values in mass %.
Base metals

EN: X6CrNiNb 18 10 · X6CrNiTi 18 10 · G-X5CrNiNb 18 9 · X5CrNi 18 10 · X12CrNiTi 18 9 · G-X10CrNi 18 8 · X10CrNiNb 18 10 · X2CrNi 19 11

AISI: 347 · 321 · 304 · 304LN

QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-347-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Stainless steels
FERVEO

ELOX R 347 — E 347-16

Technical datasheet · covered electrode · stick electrode · Ø 2 – 4 mm
FT-ELOX-R-347-EN
rev. 2 · 2026-11-21
page 2 / 2
Mechanical properties
Yield strength (Rp0.2)
min. 390 MPa
Tensile strength (Rm)
570–740 MPa
Elongation (A5)
min. 35 %
Impact energy (KV)
min. 47 J (20 °C)
Service temperature
max. 400 °C
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
120–200 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-347-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue