We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Dratec · Hardfacing

DT-DUR 67 FCW — T Fe 16

flux-cored wire (FCW)

Choose the size

  • Ø 1.6 mm · K300 15–20 kg
    ≈ 15 kg
  • Ø 2 mm · K300 15–20 kg
    ≈ 15 kg
  • Ø 2.4 mm · K300 15–20 kg
    ≈ 15 kg
  • Ø 2.8 mm · K300 15–20 kg
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

Field of application

Flux-cored wire highly alloyed with C, Cr and V, with high scratch hardness. Owing to the high percentage of alloying constituents, DT-DUR 67 is suitable for extremely hard overlays on parts subject to extremely severe abrasive mineral wear. Owing to the alloy composition, the wear resistance is retained even at elevated working temperatures. No more than two layers should be applied; screw conveyors, fan blades, agitators, clinker crushers, mixer blades, cement and concrete pumps, fire grates, gravel and washing plants, etc.

Classification and approvals

Classification

EN 14700 classT Fe 16
DIN 8555 classMF 10 - 65 - G Z

Composition and properties

Chemical composition of the wire

C5.00
V10.0
Cr22.0
Si1.00
Values in mass %.

Hardness

guide values
  • 64–67 HRC

How to weld

Welding parameters by diameter

ØCurrentVoltage
1.6 mm160–260 A20–28 V
2 mm240–280 A22–26 V
2.4 mm280–340 A25–29 V
2.8 mm320–400 A26–30 V
FERVEO guidance
By problem
Wear-resistant hardfacing
Alternatives in the catalogue
Same class
same DIN 8555 designation
ProductClassAvailability
DT-DUR 65 FCWDratecMF 10-65-GZTo order · price and lead time in the quote