
Dratec · Hardfacing
DT-DUR 65 FCW — T Fe 16
flux-cored wire (FCW)
Choose the size
- Ø 1.6 mm · K300 15–20 kg≈ 15 kg
- Ø 2.8 mm · K300 15–20 kg≈ 15 kg
To order · price and lead time in the quote
We reply within 1 working day.
Field of application
DT-DUR 65 is a flux-cored wire with a high C, Cr, Mo, Nb, W and V content. Owing to the high percentage of alloying constituents, which form extremely hard carbides, DT-DUR 65 is suitable for hard overlays on parts subject to extreme abrasive mineral wear. The wear resistance is retained at temperatures up to approx. 800 °C. The microstructure consists of Cr carbides of primary and eutectic solidification as well as Nb, Mo, W and V carbides in a heat- and scale-resistant austenitic matrix. The hardness decreases at 400 °C by about 4 % and at 700 °C by about 10 %. Blast furnace bells, fire grates, spiked crushers
Classification and approvals
Classification
| EN 14700 class | T Fe 16 |
|---|---|
| DIN 8555 class | MF 10 - 65 - G Z |
Composition and properties
Chemical composition of the wire
| C | 5.20 |
|---|---|
| V | 1.00 |
| W | 2.00 |
| Cr | 21.0 |
| Mn | 0.40 |
| Mo | 7.00 |
| Nb | 7.00 |
| Si | 1.00 |
Values in mass %.
Hardness
guide values
- 63–65 HRC
How to weld
Welding parameters by diameter
| Ø | Current | Voltage |
|---|---|---|
| 1.6 mm | 160–260 A | 20–26 V |
| 2.8 mm | 320–400 A | 25–28 V |
FERVEO guidance
By problem
Wear-resistant hardfacing
Alternatives in the catalogue
Same class
same DIN 8555 designation
| Product | Class | Availability |
|---|---|---|
| DT-DUR 67 FCWDratec | MF 10-65-GZ | To order · price and lead time in the quote |