Gedik · Low-alloy steels
TEMPO B 75 — E 10018 - G H4
covered electrode · stick electrodebasic coating
Choose the size
- Ø 2.5 × 350 mm≈ 5 kg
- Ø 3.2 × 350 mm≈ 5 kg
- Ø 4 × 450 mm≈ 5 kg
- Ø 5 × 450 mm≈ 5 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
6.97–11.14 kg
of TEMPO B 75 for 10 m of weld
3 packs of ≈ 5 kg
Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm
100 °C
Minimum preheat and minimum interpass temperature
EN 1011-2, annex C, method B · rounded up to 5 °C
✓ Within the range of method B.
Calculated with: HD 5 ml/100 g from this product's class H5 · 111 — basic electrode: 24 V, 160 A, 15 cm/min
See the full calculation →Field of application
- Content of Mn-Mo-Ni alloy
- High ductility and high resistance to cracking obtained in welding high-strength, quenched and tempered, fine-grained structural steels
- Suitability for use in welding of materials with service temperatures between -60°C and +400°C
- Very high values of impact resistance after aging
- Convenience of welding at all positions except for the vertical down position.
- Possibility of applying same heat treatment temperatures at pre- and post-welding as well as at transition stages as those of base metal
- Weld deposits with very low contents of hydrogen
- Requirement of re-drying for minimum 2 hours at the temperatures between 300°C and 350°C
Base metals
The yield strength of 620 N/mm2 up to the quenched and tempered fine grain steels780 N/mm2 heat treating steels
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up |
|---|---|
| Polarity | DC+ |
Classification and approvals
Classification
| AWS class | E 10018 - G H4 |
|---|---|
| EN ISO class | E 62 6 Z 1NiMo B 4 2 H5 |
Approvals
- CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the weld metal
| C | 0.05 |
|---|---|
| Cr | 0.30 |
| Mn | 1.30 |
| Mo | 0.50 |
| Ni | 1.30 |
| Si | 0.50 |
Values in mass %.
Mechanical properties
after heat treatment: 560–600 °C / 1 h / 300 °C (air)
| Yield strength (Rp0.2) | min. 620 MPa |
|---|---|
| Tensile strength (Rm) | 690–890 MPa |
| Elongation (A5) | min. 18 % |
| Impact energy (KV) | min. 47 J (−60 °C) |
How to weld
Treatment and preparation
| Re-drying | 300–350 °C / min. 2 h |
|---|---|
| Post-weld heat treatment | possible at the same temperatures as the base metal |
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 2.5 mm | 350 mm | 80–110 A |
| 3.2 mm | 350 mm | 100–140 A |
| 4 mm | 450 mm | 130–190 A |
| 5 mm | 450 mm | 190–240 A |
FERVEO guidance
By problem
Structural steels