Gedik · Low-alloy steels

TEMPO B 70 S — E 9018 - G H4
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 5 mm
FT-TEMPO-B-70-S-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 9018 - G H4
Diameters
Ø 2.5 – 5 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
80–110 A
GDK-3010100570
3.2 mm
350 mm
100–140 A
GDK-3010100573
4 mm
450 mm
130–190 A
GDK-3010100576
5 mm
450 mm
190–240 A
GDK-3010100579
Application
- Suitable for welding high-strength fine-grained steels
- High ductility and high crack resistance in welds produced in fine-grained steels
- Suitable for applications involving service temperatures from -60 °C to +350 °C
- Redrying is required for at least 2 hours at 300 °C to 350 °C
Classification
AWS class
E 9018 - G H4
EN ISO class
E 55 6 2 NiMo BT 42 H5
Approvals
CE, ABS, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Mn
Mo
Ni
Si
0.07
0.60
0.40
2.40
0.20
Values in mass %.
Base metals
S380N-S500N · S355NH-S460NH · S380NL-500NL · Fine grained · high alloyed steels and steel castings
API 5L: X52 · X56 · X60 · X65 · X70
Mechanical properties
after heat treatment: 560–600 °C / 1 h / 300 °C (air)
Yield strength (Rp0.2)
min. 550 MPa
Tensile strength (Rm)
620–780 MPa
Elongation (A5)
min. 18 %
Impact energy (KV)
min. 47 J (−60 °C)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-TEMPO-B-70-S-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue