Gedik · Low-alloy steels

TEMPO B 48 — E 7018-G H4
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-TEMPO-B-48-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 7018-G H4
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
60–100 A
GDK-3010100462
3.2 mm
350 mm
80–130 A
GDK-3010100465
4 mm
350 mm
120–180 A
GDK-3010100471
Application
- This is AC/DC basic-coated electrode that has a weld metal recovery of 120% which can be used at all welding positions except for the vertical down position
- Usable with short arc in (-) pole for root pass welding with excellent penetration, especially at vertical-up position
- Weld deposit with high low temperature toughness
- Re-drying: 300-350°C / 2h
Classification
AWS class
E 7018-G H4
EN ISO class
E 42 6 1 Ni B 32 H5
Approvals
TSE, CE, ABS, SEPRO, BV
Validity is confirmed with the order
Chemical composition of the weld metal
C
Mn
Ni
Si
0.06
1.00
0.80
0.50
Values in mass %.
Base metals
EN 10205: S355J2G3 · S355JR · S355JO · S355J2G4 · S355K2G3 · S355K2G4
ASTM: A 572 Gr.50 · A709Gr.50 · A678Gr.50 · A633Gr.D
API 5L: A · B · X42 · X46 · X52 · X56 · X60
Mechanical properties
Yield strength (Rp0.2)
min. 460 MPa
Tensile strength (Rm)
530–640 MPa
Elongation (A5)
min. 22 %
Impact energy (KV)
min. 47 J (−60 °C)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-TEMPO-B-48-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue