Gedik · Low-alloy steels

TEMPO B 3 — E 8018-C2 H4
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 5 mm
FT-TEMPO-B-3-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 8018-C2 H4
Diameters
Ø 2.5 – 5 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
70–110 A
GDK-3010100693
3.2 mm
350 mm
110–140 A
GDK-3010100696
4 mm
450 mm
140–180 A
GDK-3010100702
5 mm
450 mm
190–230 A
GDK-3010100705
Application
- Suitability for use in welding Ni-alloyed construction steels for cryogenic applications
- High ductility and crack resistance in weld deposits
- Serviceability of weld metals at temperatures down to -110°C
- Weld metal recovery of approx. 120%
- Convenience of welding at all positions except for vertical down position
- Weld deposits with very low contents of hydrogen
- Requirement of re-drying for minimum 2 hours at the temperatures between 300°C and 350°C
Classification
AWS class
E 8018-C2 H4
EN ISO class
E 46 6 3 Ni B 42 H5
Approvals
TSE, CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Mn
Ni
Si
0.05
0.70
3.20
0.30
Values in mass %.
Base metals
Cold-tough steels: 10 Ni14 · 16Ni16 · S 255NL1-SS00NL1 · S275NL2-P460NL2
Mechanical properties
after heat treatment: 605 °C / 2 h / 300 °C (air)
Yield strength (Rp0.2)
min. 460 MPa
Tensile strength (Rm)
550–700 MPa
Elongation (A5)
min. 24 %
Impact energy (KV)
min. 47 J (−100 °C)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-TEMPO-B-3-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue