Download PDF
← Technical datasheet
Gedik · Low-alloy steels
FERVEO

TEMPO B 1 — E 8018 -C3 H4

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 5 mm
FT-TEMPO-B-1-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 8018 -C3 H4
Diameters
Ø 2.5 – 5 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
70–100 A
GDK-3010100660
3.2 mm
350 mm
110–140 A
GDK-3010100663
4 mm
350 mm
140–180 A
GDK-3010100669
4 mm
450 mm
140–190 A
GDK-3010100672
5 mm
450 mm
190–240 A
GDK-3010100678
Application
  • Suitability for use in welding low-alloyed steels resistant to lower service temperatures
  • Serviceability of weld metals at temperatures down to -60°C
  • Weld metal recovery of approx. 120%
  • Requirement of re-drying for minimum 2 hours at the temperatures between 300°C and 350°C
Classification
AWS class
E 8018 -C3 H4
EN ISO class
E 46 6 1 Ni B 42 H5
Approvals

TSE, CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Mn
Mo
Ni
Si
0.07
1.00
0.15
1.00
0.30
Values in mass %.
Base metals

11 MnNi53 · 13MnNi63 · TTSt35N · TTSt35V · TTSt41 · TTSt45 · S255N-S500N · S255NL-S500NL

Mechanical properties
Yield strength (Rp0.2)
min. 470 MPa
Tensile strength (Rm)
550–680 MPa
Elongation (A5)
min. 24 %
Impact energy (KV)
min. 47 J (−60 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-TEMPO-B-1-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Low-alloy steels
FERVEO

TEMPO B 1 — E 8018 -C3 H4

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 5 mm
FT-TEMPO-B-1-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Recovery
approx. 120 %
Treatment and preparation
Re-drying
300–350 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-TEMPO-B-1-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue