We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Low-alloy steels

TEMPO B 1 — E 8018 -C3 H4

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 350 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 350 mm
    ≈ 5 kg
  • Ø 4 × 450 mm
    ≈ 5 kg
  • Ø 5 × 450 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.63
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.15–9.68 kg

of TEMPO B 1 for 10 m of weld

2 packs of ≈ 5 kg

Calculated with: η 0.63 — from the datasheet (recovery 120 %, Ø 2.5 × 350 mm) · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm

100 °C

Minimum preheat and minimum interpass temperature

EN 1011-2, annex C, method B · rounded up to 5 °C

✓ Within the range of method B.

Calculated with: HD 5 ml/100 g from this product's class H5 · 111 — basic electrode: 24 V, 160 A, 15 cm/min

See the full calculation →

Field of application

  • Suitability for use in welding low-alloyed steels resistant to lower service temperatures
  • Serviceability of weld metals at temperatures down to -60°C
  • Weld metal recovery of approx. 120%
  • Requirement of re-drying for minimum 2 hours at the temperatures between 300°C and 350°C

Base metals

11 MnNi5313MnNi63TTSt35NTTSt35VTTSt41TTSt45S255N-S500NS255NL-S500NL
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS classE 8018 -C3 H4
EN ISO classE 46 6 1 Ni B 42 H5

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.07
Mn1.00
Mo0.15
Ni1.00
Si0.30
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 470 MPa
Tensile strength (Rm)550–680 MPa
Elongation (A5)min. 24 %
Impact energy (KV)min. 47 J (−60 °C)

How to weld

Process

Recoveryapprox. 120 %

Treatment and preparation

Re-drying300–350 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2.5 mm350 mm70–100 A
3.2 mm350 mm110–140 A
4 mm350 mm140–180 A
4 mm450 mm140–190 A
5 mm450 mm190–240 A
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
TEMPO B 60GedikE 46 6 1Ni B 42 H5530–680 MPamin. 47 J (−60 °C)To order · price and lead time in the quote