Download PDF
← Technical datasheet
Gedik · Low-alloy steels
FERVEO

SG NiMo1 MIG — ER 100 S-G

Technical datasheet · solid wire · Ø 1.2 mm
FT-SG-NIMO1-MIG-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
solid wire
Standard
ER 100 S-G
Diameters
Ø 1.2 mm
Application
  • Fine-grained low alloy steels and also austempering steels for applications. Building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding, etc
  • If necessary, post-weld stress relief shall be heat treated at 560°C-600°C for 1 hour and left in the furnace for cooling down to 300°C
  • Shielding gas: Ar+CO2 mix gases can be used
Classification
AWS class
ER 100 S-G
EN ISO class
G 62 6 C1/M21 Mn3Ni1Mo
Approvals

CE, SEPRO

Validity is confirmed with the order

Chemical composition of the wire
C
Mn
Mo
Ni
Si
0.09
1.70
0.40
1.15
0.65
Values in mass %.
Base metals

P355NL1 · P460NL1 · StE460-590 · USS-T.TTS · TE47-51 · N-X-ATRA 70 · WTSt37-2 · WT37-3 · WTSt52-3 · WT St52-3A · Patinax 37 · Alcodur 50 · Koralpin 52 · S255 · S550 · A516 · A350 · A612 · A255 · A299 · A333

Mechanical properties
Yield strength (Rp0.2)
min. 620 MPa
Tensile strength (Rm)
700–890 MPa
Elongation (A5)
min. 18 %
Impact energy (KV)
min. 47 J (−60 °C)
Process
Polarity
DC+
Shielding gas
Ar + CO2
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up · PG vertical-down
Shielding
Requires shielding gas
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-SG-NIMO1-MIG-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Low-alloy steels
FERVEO

SG NiMo1 MIG — ER 100 S-G

Technical datasheet · solid wire · Ø 1.2 mm
FT-SG-NIMO1-MIG-EN
rev. 2 · 2026-11-21
page 2 / 2
Sizes and packaging
Ø
Packaging
Code
1.2 mm
BS 300 spool
GDK-6031100218
Treatment and preparation
Post-weld heat treatment
560–600 °C / 1 h / furnace down to 300 °C, if necessary
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-SG-NIMO1-MIG-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue