Gedik · Low-alloy steels

SG NiCu MIG — ER80S-G
Technical datasheet · solid wire · Ø 1.2 mm
FT-SG-NICU-MIG-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
solid wire
Standard
ER80S-G
Diameters
Ø 1.2 mm
Sizes and packaging
Ø
Packaging
Code
1.2 mm
BS 300 spool
GDK-6031100122
Application
- Excellent resistance to atmospheric events due to the presence of Cu, Cr, Ni
- Suitable for bridges, cranes, ground moving machines, boilers, building structures, petrochemical sector, fans gas pipes, fume section, etc
- Shielding gas: Ar+CO2 mix gases can be used
- Depending on the thickness of the main material to be used, a pre-heating application can be applied to the main material before starting the welding.
Classification
AWS class
ER80S-G
EN ISO class
G504 M121 Z (3Ni1)
Approvals
CE, SEPRO
Validity is confirmed with the order
Chemical composition of the wire
C
Cr
Cu
Mn
Ni
Si
0.08
0.20
0.40
1.30
0.80
0.80
Values in mass %.
Base metals
S235JRW · S235J2G3 · Patinax 37 · Alcodur 50 · Koralpin 52 · S355J2G3Cu · 9CrNiCuP3-2-4 · Corten A-B1 · WTSt37 · WTST52.3 · S355K2W
Mechanical properties
Yield strength (Rp0.2)
510 MPa
Tensile strength (Rm)
590 MPa
Elongation (A5)
25 %
Impact energy (KV)
110 J (−20 °C) · 60 J (−40 °C)
Process
Polarity
DC+
Shielding gas
Ar + CO2
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-SG-NICU-MIG-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue