We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Low-alloy steels

SG NiCu MIG — ER80S-G

solid wire

Choose the size

  • Ø 1.2 mm · BS 300 spool
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 135 · η 0.92–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

4.62–6.66 kg

of SG NiCu MIG for 10 m of weld

1 pack of 15 kg

Calculated with: η 0.92–0.98: typical value for process 135 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →

Field of application

  • Excellent resistance to atmospheric events due to the presence of Cu, Cr, Ni
  • Suitable for bridges, cranes, ground moving machines, boilers, building structures, petrochemical sector, fans gas pipes, fume section, etc
  • Shielding gas: Ar+CO2 mix gases can be used
  • Depending on the thickness of the main material to be used, a pre-heating application can be applied to the main material before starting the welding.

Base metals

S235JRWS235J2G3Patinax 37Alcodur 50Koralpin 52S355J2G3Cu9CrNiCuP3-2-4Corten A-B1WTSt37WTST52.3S355K2W
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC+
Shielding gasAr + CO2

Classification and approvals

Classification

AWS classER80S-G
EN ISO classG504 M121 Z (3Ni1)

Approvals

  • CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C0.08
Cr0.20
Cu0.40
Mn1.30
Ni0.80
Si0.80
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)510 MPa
Tensile strength (Rm)590 MPa
Elongation (A5)25 %
Impact energy (KV)110 J (−20 °C) · 60 J (−40 °C)

How to weld

Process

ShieldingRequires shielding gas

Treatment and preparation

Pre-heatingdepending on the base material thickness
FERVEO guidance
By problem
Structural steels