Download PDF
← Technical datasheet
Gedik · Creep-resisting Cr-Mo steels
FERVEO

OPUS 9 CMV-15 — E9015-B91 H4

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-OPUS-9-CMV-15-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E9015-B91 H4
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
350 mm
80–110 A
GDK-3010100882
3.2 mm
350 mm
110–140 A
GDK-3010100885
4 mm
350 mm
140–190 A
GDK-3010100888
Application
  • High-alloyed low-hydrogen electrode with basic-type coating
  • Resistance to heat and creep, high resistance to creeping and high toughness values under long-term stress
  • Weld metal’s resistance to high temperatures up to 620°C
  • Pre-heating and inter-pass welding temperature: 200°C - 315°C,
  • Requirement of re-drying for min. 2 hours at the temperatures between 300°C and 350°C
Classification
AWS class
E9015-B91 H4
EN ISO class
E CrMo91 B 42 H5
Approvals

CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
N
V
Cr
Mn
Mo
Nb
Ni
Si
0.09
present
0.20
9.00
0.50
1.00
0.04
1.00
0.20
Values in mass %.
Base metals

X10CrMoVNb 9-1 · A213 Gr. T91 · A 335 Gr. P91 (T91) · A 139Gr.T91 · % 9-12 Cr type martensitic stainless steels

Mechanical properties
Service temperature
max. 620 °C
after heat treatment: 745–775 °C / 2 h / 300 °C (air)
Yield strength (Rp0.2)
min. 530 MPa
Tensile strength (Rm)
min. 620 MPa
Elongation (A5)
min. 17 %
Impact energy (KV)
min. 47 J (20 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPUS-9-CMV-15-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Creep-resisting Cr-Mo steels
FERVEO

OPUS 9 CMV-15 — E9015-B91 H4

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-OPUS-9-CMV-15-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / min. 2 h
Pre-heating
200–315 °C
Interpass temperature
200–315 °C
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-OPUS-9-CMV-15-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue