Gedik · Hardfacing
HARDCOR 60 G FCW — T Fe 8
flux-cored wire (FCW)
Choose the size
- Ø 1.2 mm · 15 kg≈ 15 kg
- Ø 1.6 mm · 15 kg≈ 15 kg
To order · price and lead time in the quote
We reply within 1 working day.
Field of application
- Metal type flux-cored wire.
- Examples of applications; cutting tools, blades of shears, rolls for cold rolling mills, roller table roll, forging die, jaw crusher, breaker hammer, beating arm, clod crusher, ripper tooth, scarifies, mixer part, mixer bottom, blast furnace valve, top gas valve, sea dredger slide guide, shackle, mixer parts.
- Used for resistance to abrasion, impact resistance and heat resistance.
- The weld metal is air-hardening and can usually only be worked by grinding. Preheating up to 200 to 300°C is recommended.
- Shielding Gas: CO2 (M21)
| Polarity | DC+ |
|---|---|
| Shielding gas | CO2, M21 |
Classification and approvals
Classification
| EN 14700 class | T Fe 8 |
|---|---|
| DIN 8555 class | MF 6 GF 60 GP |
Composition and properties
Chemical composition of the weld metal
| C | 0.60 |
|---|---|
| V | 0.20 |
| Cr | 5.50 |
| Fe | balance |
| Mn | 0.60 |
| Mo | 0.25 |
| Si | 0.60 |
Values in mass %.
Hardness
- as welded — 57–62 HRC
How to weld
Process
| Shielding | Requires shielding gas |
|---|
Treatment and preparation
| Pre-heating | 200–300 °C |
|---|
Welding parameters by diameter
| Ø | Current | Voltage | Stick-out |
|---|---|---|---|
| 1.2 mm | 170–200 A | 27–30 V | 25–30 mm |
| 1.6 mm | 180–200 A | 26–30 V | 30–35 mm |
FERVEO guidance
By problem
Wear-resistant hardfacing
Alternatives in the catalogue
Same class
same DIN 8555 designation
| Product | Class | Availability |
|---|---|---|
| HARDCOR 600 G FCWGedik | MF 6-GF-60-GP | To order · price and lead time in the quote |
| HARDCOR 600 O FCWGedik | MF 6-GF-60-GP | To order · price and lead time in the quote |
| HARDCOR M 600 G FCWGedik | MF 6-GF-60-GP | To order · price and lead time in the quote |