Download PDF
← Technical datasheet
Kjellberg · Stainless steels
FERVEO

FINOX 4829 AC — E 309-17

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FINOX-4829-AC-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 309-17
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
300 mm
70–100 A
4 kg
KJB-00717250
3.25 mm
350 mm
100–140 A
5 kg
KJB-00717323
4 mm
350 mm
130–170 A
5 kg
KJB-00717403
Application

Electrode for joining and surfacing on matching or similar heat-resisting steels and cast steels up to 950 °C. Particularly suitable for the steel X 15 CrNiSi 20 12 (1.4828).

Classification
AWS class
E 309-17
EN ISO class
E 22 12 R 32
Material no. (W.-Nr.)
1.4829
Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.10
22.5
0.70
12.5
0.80
Values in mass %.
Base metals

1.4710 GX 30 CrSi7 · 1.4713 X 10 CrAlSi7 · 1.4724 X 10 CrAlSi13 · 1.4740 GX 40 CrSi17 · 1.4742 X 10 CrAlSi18 · 1.4826 GX 40 CrNiSi 22-10 · 1.4828 X 15 CrNiSi 20-12 · 1.4833 X 12 CrNi 23-13 · 1.4878 X 8 CrNiTi 18-10 · AISI 309

Mechanical properties
Yield strength (Rp0.2)
> 350 MPa
Tensile strength (Rm)
> 550 MPa
Elongation (A5)
> 30 %
Impact energy (KV)
> 55 J (room temperature)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4829-AC-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Stainless steels
FERVEO

FINOX 4829 AC — E 309-17

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FINOX-4829-AC-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4829-AC-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue