Electrode for joining non-alloy and low-alloy steels to each other in any combination, and to high-alloy Cr, CrNi and CrNiMo steels and cast steels, for dissimilar joints between austenitic and ferritic steels for service temperatures up to 300 °C, and for welding buffer layers and intermediate layers applied as a single layer in corrosion-resisting claddings. The weld metal is corrosion-resisting already in the first layer and, in addition, particularly crack-resistant, even on difficult-to-weld steels. Above 500 °C there is a risk of embrittlement.
Classification
AWS class
E309MoL-16
EN ISO class
E 23 12 2 L R 32
Materialno.(W.-Nr.)
1.4459
Approvals
TÜV, DNV-GL, CE
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Mo
Ni
Si
0.02
23.0
0.70
2.60
13.0
0.90
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
> 450 MPa
Tensile strength (Rm)
> 600 MPa
Elongation (A5)
> 30 %
Impact energy (KV)
> 50 J (room temperature)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4459-AC-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Kjellberg 2019 catalogue
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4459-AC-EN · rev. 2 · page 2 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Kjellberg 2019 catalogue