We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Stainless steels

FINOX 4459 AC — E 309 MoL-16

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2.5 × 300 mm · 4 kg
    ≈ 4 kg
  • Ø 3.25 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 350 mm · 5 kg
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Which filler joins two different metals?With this product's data: 309LMo

SuitableFN 7.6 (WRC-1992)

✓

Maximum dilution with this filler: 41.5 %

Calculated with: filler 309LMo — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

Electrode for joining non-alloy and low-alloy steels to each other in any combination, and to high-alloy Cr, CrNi and CrNiMo steels and cast steels, for dissimilar joints between austenitic and ferritic steels for service temperatures up to 300 °C, and for welding buffer layers and intermediate layers applied as a single layer in corrosion-resisting claddings. The weld metal is corrosion-resisting already in the first layer and, in addition, particularly crack-resistant, even on difficult-to-weld steels. Above 500 °C there is a risk of embrittlement.

PositionsPA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS classE 309 MoL-16
EN ISO classE 23 12 2 L R 32
Material no. (W.-Nr.)1.4459

Approvals

  • TÜV, DNV-GL, CE
According to the Kjellberg 2019 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.02
Cr23.0
Mn0.70
Mo2.60
Ni13.0
Si0.90
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)> 450 MPa
Tensile strength (Rm)> 600 MPa
Elongation (A5)> 30 %
Impact energy (KV)> 50 J (room temperature)

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
2.5 mm300 mm80–100 A
3.25 mm350 mm100–130 A
4 mm350 mm120–160 A
FERVEO guidance
By problem
Dissimilar metalsStainless steel and dissimilar metalsCorrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
ELOX R 309 MoLGedikE 23 12 2 L R 32700 MPamin. 55 J (20 °C)To order · price and lead time in the quote
ELOX R 309 MoL-17GedikE 23 12 2 L R 32620–750 MPamin. 47 J (20 °C)To order · price and lead time in the quote