Download PDF
← Technical datasheet
Kjellberg · Stainless steels
FERVEO

FINOX 4370 B — ≈ E 307-15

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FINOX-4370-B-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
≈ E 307-15
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
300 mm
70–100 A
4 kg
KJB-00744250
3.25 mm
350 mm
100–130 A
5 kg
KJB-00744323
4 mm
350 mm
120–160 A
5 kg
KJB-00744403
Application

Basic covered electrode for joining and surfacing dissimilar steels, and quenched and tempered steels, armour steels and austenitic manganese steels in any combination, for dissimilar joints between austenitic and ferritic steels at service temperatures up to 300 °C, and for welding high-carbon and difficult-to-weld steels. The weld metal is fully austenitic, corrosion-resisting, resistant to scaling up to 850 °C and work-hardenable up to a hardness of approx. 350 HB.

Classification
AWS class
≈ E 307-15
EN ISO class
E 18 8 Mn B 22
Material no. (W.-Nr.)
1.4370
Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.10
19.0
6.50
9.00
0.50
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
> 350 MPa
Tensile strength (Rm)
> 600 MPa
Elongation (A5)
> 35 %
Impact energy (KV)
> 100 J (room temperature)
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
250–300 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4370-B-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue