We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Stainless steels

FINOX 4370 B — ≈ E 307-15

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 300 mm · 4 kg
    ≈ 4 kg
  • Ø 3.25 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 350 mm · 5 kg
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Which filler joins two different metals?With this product's data: 307

SuitableFN 0.0 (WRC-1992)

  • Fully austenitic with manganese: tolerates no ferrite (307 type).

Maximum dilution with this filler: 45.5 %

Calculated with: filler 307 — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

Basic covered electrode for joining and surfacing dissimilar steels, and quenched and tempered steels, armour steels and austenitic manganese steels in any combination, for dissimilar joints between austenitic and ferritic steels at service temperatures up to 300 °C, and for welding high-carbon and difficult-to-weld steels. The weld metal is fully austenitic, corrosion-resisting, resistant to scaling up to 850 °C and work-hardenable up to a hardness of approx. 350 HB.

PositionsPA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS class≈ E 307-15
EN ISO classE 18 8 Mn B 22
Material no. (W.-Nr.)1.4370

Composition and properties

Chemical composition of the weld metal

C0.10
Cr19.0
Mn6.50
Ni9.00
Si0.50
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)> 350 MPa
Tensile strength (Rm)> 600 MPa
Elongation (A5)> 35 %
Impact energy (KV)> 100 J (room temperature)

How to weld

Treatment and preparation

Re-drying250–300 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
2.5 mm300 mm70–100 A
3.25 mm350 mm100–130 A
4 mm350 mm120–160 A
FERVEO guidance
By problem
Dissimilar metalsWear-resistant hardfacingCorrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
ELOX B 307GedikE 18 8 Mn B 22580–750 MPamin. 80 J (20 °C)To order · price and lead time in the quote