Download PDF
← Technical datasheet
Kjellberg · Stainless steels
FERVEO

FINOX 4370 AC — ≈ E 307-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FINOX-4370-AC-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
≈ E 307-16
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
300 mm
70–100 A
4 kg
KJB-00721250
3.25 mm
350 mm
100–140 A
5 kg
KJB-00721323
4 mm
350 mm
130–170 A
5 kg
KJB-00721403
Application

Electrode for joining non-alloy and low-alloy steels to high-alloy steels and cast steels, for dissimilar joints between austenitic and ferritic steels at service temperatures up to 300 °C, for welding high-carbon and difficult-to-weld steels and austenitic manganese steels, for welding buffer layers and for hardfacing under work-hardening impact, compressive and rolling loads. The weld metal is fully austenitic, corrosion-resisting, resistant to scaling up to 850 °C and work-hardenable up to a hardness of 350 HB.

Classification
AWS class
≈ E 307-16
EN ISO class
E 18 8 Mn R 12
Material no. (W.-Nr.)
1.4370
Approvals

DB, TÜV, CE

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.10
19.0
6.00
9.00
0.90
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
> 350 MPa
Tensile strength (Rm)
> 550 MPa
Elongation (A5)
> 35 %
Impact energy (KV)
> 75 J (room temperature)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4370-AC-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Stainless steels
FERVEO

FINOX 4370 AC — ≈ E 307-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FINOX-4370-AC-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4370-AC-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue