We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Stainless steels

FINOX 4370 AC — ≈ E 307-16

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2.5 × 300 mm · 4 kg
    ≈ 4 kg
  • Ø 3.25 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 350 mm · 5 kg
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Which filler joins two different metals?With this product's data: 307

SuitableFN 0.0 (WRC-1992)

  • Fully austenitic with manganese: tolerates no ferrite (307 type).

Maximum dilution with this filler: 45.5 %

Calculated with: filler 307 — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

Electrode for joining non-alloy and low-alloy steels to high-alloy steels and cast steels, for dissimilar joints between austenitic and ferritic steels at service temperatures up to 300 °C, for welding high-carbon and difficult-to-weld steels and austenitic manganese steels, for welding buffer layers and for hardfacing under work-hardening impact, compressive and rolling loads. The weld metal is fully austenitic, corrosion-resisting, resistant to scaling up to 850 °C and work-hardenable up to a hardness of 350 HB.

PositionsPA flat PB horizontal-vertical PC horizontal PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS class≈ E 307-16
EN ISO classE 18 8 Mn R 12
Material no. (W.-Nr.)1.4370

Approvals

  • DB, TÜV, CE
According to the Kjellberg 2019 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.10
Cr19.0
Mn6.00
Ni9.00
Si0.90
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)> 350 MPa
Tensile strength (Rm)> 550 MPa
Elongation (A5)> 35 %
Impact energy (KV)> 75 J (room temperature)

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
2.5 mm300 mm70–100 A
3.25 mm350 mm100–140 A
4 mm350 mm130–170 A
FERVEO guidance
By problem
Dissimilar metalsCorrosion-resistant alloys