Electrode for joining and surfacing on matching and similar steels and cast steels, for joining higher-strength non-alloy and low-alloy structural steels, quenched and tempered steels, tool steels and austenitic manganese steel, and for joining dissimilar steels to each other and to high-alloy stainless steels. The electrode is also suitable for crack-resistant, hard and tough intermediate layers under hardfacing, and for hardfacing deposits, work-hardenable when cold and hot. The austenitic-ferritic weld metal is stainless, corrosion-resisting and suitable for service temperatures up to 300 °C. Owing to the higher delta-ferrite content of the weld metal, dissimilar joints between ferritic and austenitic steels have high resistance to hot cracking.
Classification
AWS class
E312-16
EN ISO class
E 29 9 R 12
Materialno.(W.-Nr.)
1.4337
Approvals
CE
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.10
29.0
1.00
9.00
0.90
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
> 500 MPa
Tensile strength (Rm)
> 700 MPa
Elongation (A5)
> 20 %
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4337-AC-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Kjellberg 2019 catalogue
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-4337-AC-EN · rev. 2 · page 2 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Kjellberg 2019 catalogue