Download PDF
← Technical datasheet
Kjellberg · Nickel alloys
FERVEO

FINOX 182 — E NiCrFe-3

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FINOX-182-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E NiCrFe-3
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
350 mm
80–110 A
5 kg
KJB-00760253
3.25 mm
350 mm
110–140 A
5 kg
KJB-00760323
4 mm
350 mm
140–180 A
5 kg
KJB-00760403
Application

Nickel-base electrode for high-quality, crack-resistant joining and cladding on matching nickel-chromium-iron alloys, (heat-resisting) Cr and CrNi (Mo, N) steels and nickel-alloyed pressure vessel steels tough at low temperatures. For dissimilar joints between austenitic and ferritic steels (e.g. 1.4583 with 16Mo3). Use at service temperatures from -196 °C up to 800 °C. (In sulphur-containing atmospheres only up to 500 °C). The fully austenitic weld metal is corrosion-resisting, tough at low temperatures, with high-temperature strength, resistant to scaling up to 1,000 °C and not susceptible to embrittlement.

Classification
AWS class
E NiCrFe-3
EN ISO class
≈ E Ni 6182 (NiCr15Fe6Mn)
Material no. (W.-Nr.)
2.4620
Chemical composition of the weld metal
C
Cr
Fe
Mn
Mo
Nb
Ni
Si
0.05
16.0
8.00
6.00
1.00
2.00
balance
0.50
Values in mass %.
Base metals

1.4876 X 10 NiCrAlTi 32-21 · 2.4816 NiCr 15 Fe · Alloy 600 · Alloy 800

Mechanical properties
Yield strength (Rp0.2)
> 350 MPa
Tensile strength (Rm)
> 620 MPa
Elongation (A5)
> 35 %
Impact energy (KV)
> 90 J (room temperature)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-182-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Nickel alloys
FERVEO

FINOX 182 — E NiCrFe-3

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FINOX-182-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PF vertical-up
Treatment and preparation
Re-drying
150–200 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FINOX-182-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue