Download PDF
← Technical datasheet
Kjellberg · Tool steels
FERVEO

FIDUR 23/250 — E NiCrMo-5

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FIDUR-23-250-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E NiCrMo-5
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
2.5 mm
350 mm
70–100 A
5 kg
KJB-00617253
3.25 mm
350 mm
120–140 A
5 kg
KJB-00617323
4 mm
350 mm
160–190 A
5 kg
KJB-00617403
Application

Electrode for corrosion-resistant deposits with high strength at elevated temperatures and good thermal shock resistance. Particularly suitable for the repair and production of new hot-work tools such as forging dies, dies, open-die forging saddles, press and piercing mandrels, trimming dies, etc. Also suitable for surfacing on non-alloy and low-alloy higher-strength steels. Under oxidising and reducing conditions, the weld metal is corrosion-resistant, particularly tough and crack-resistant, with high-temperature strength, and precipitation-hardenable at about 780 °C. It work-hardens under impact and is machinable.

Classification
AWS class
E NiCrMo-5
EN 14700 class
E Z Ni 2
Material no. (W.-Nr.)
≈ 2.4887
DIN 8555 class
E 23-UM-250 CNKPTZ
Chemical composition of the weld metal
C
W
Co
Cr
Fe
Mo
Ni
0.06
4.50
2.50
16.0
5.00
17.0
balance
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
> 390 MPa
Tensile strength (Rm)
> 680 MPa
Elongation (A5)
40 %
Hardness
as welded
approx. 220 HB
Hardness after work hardening
approx. 400 HB
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FIDUR-23-250-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue

Kjellberg · Tool steels
FERVEO

FIDUR 23/250 — E NiCrMo-5

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-FIDUR-23-250-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat
Recovery
180 %
Treatment and preparation
Re-drying
250–300 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FIDUR-23-250-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue